Calculated specs for X570 with Ryzen 7 3700X and 3200 DDR4 CL14 RAM.
Calculated specs for X570 with Ryzen 7 3700X and 3200 DDR4 CL14 RAM.
The issue likely stems from mismatched settings between auto RAM speed and the calculated Whit Infinity fabric frequency. Ensure the auto settings align with the desired 1600MHz for a 1:1 ratio, avoiding conflicts between hardware and software adjustments.
since 3200MHz represents the memory's data rate, the real operating frequency is 1600MHz. DDR transmits data twice per clock cycle, meaning a 1:1 ratio applies to UCLK and memory speed, not FCLK. For optimal stability, FCLK should reach as high as feasible, ideally 200MHz above UCLK if possible.
I figured you had to adjust the RAM to 3400 to boost FCLK. That’s cool, as long as I keep tweaking the FCLK to its maximum so the descent boot runs smoothly—that’s ideal. But then the 1:1 ratio isn’t quite perfect? Always remember that’s the right approach. Thanks for the replay!