Cable 24PIN jammed issue

TheShadow02
Junior Member

11-02-2020, 01:52 PM

Hey, the 24pin cable is really stuck and won't budge. I know how to take it out, but this one seems super tight. Got any tips on how to get it off?

TheShadow02

11-02-2020, 01:52 PM #1

Hey, the 24pin cable is really stuck and won't budge. I know how to take it out, but this one seems super tight. Got any tips on how to get it off?

DJKiller22
Member

138

11-02-2020, 02:55 PM

Are you trying to pull harder or is something stuck? Did you place it incorrectly?

DJKiller22

11-02-2020, 02:55 PM #2

Are you trying to pull harder or is something stuck? Did you place it incorrectly?

Drizzard_V
Junior Member

11-03-2020, 11:04 AM

I've attempted that. I believe I'll stop if I push further.

Drizzard_V

11-03-2020, 11:04 AM #3

I've attempted that. I believe I'll stop if I push further.

RoseJr
Member

244

11-03-2020, 02:54 PM

You're nudging the tab to open it, adjusting its position slightly.

RoseJr

11-03-2020, 02:54 PM #4

You're nudging the tab to open it, adjusting its position slightly.

Arazon
Member

177

11-05-2020, 05:29 AM

Also no luck, it doesn't seem to be resolving.

Arazon

11-05-2020, 05:29 AM #5

Also no luck, it doesn't seem to be resolving.

Heryx
Member

123

11-23-2020, 09:48 PM

You should just apply more force. A tiny flat screwdriver can act as a lever to push it up slightly. Make sure it isn’t connected to the wall, turn off the power supply, and press the power button a few times to reset it.

Heryx

11-23-2020, 09:48 PM #6

khaledkb_
Senior Member

724

11-28-2020, 09:53 AM

I finally managed to unplug it. It seems it had been plugged in for a few years.

khaledkb_

11-28-2020, 09:53 AM #7

I finally managed to unplug it. It seems it had been plugged in for a few years.

superchacho34
Junior Member

11-30-2020, 12:39 AM

Got it! You're happy with the result.

superchacho34

11-30-2020, 12:39 AM #8

Got it! You're happy with the result.

Renitski
Member

12-03-2020, 02:25 AM

It's okay. PC parts can handle more than you expect. Glad it turned out fine.

Renitski

12-03-2020, 02:25 AM #9

It's okay. PC parts can handle more than you expect. Glad it turned out fine.