Building advice here—does it seem like a solid plan?
Building advice here—does it seem like a solid plan?
I'm looking to assemble an AM5 build using parts I've identified, based in the UK. Could you confirm if this approach could help me save costs? Here are the components I'm considering:
CPU
Amazon.co.uk
Motherboard
Amazon.co.uk
RAM
Amazon.co.uk
GPU
Amazon.co.uk
Case
Amazon.co.uk
Cooler – unsure about air or AIO, any suggestions?
Storage
Amazon.co.uk
Power supply – I already have an EVGA 850W GQ gold-rated unit.
Lastly, I need reliable fans to keep components cool.
Thank you for your assistance; I haven't built a system since selling my previous setup (8700K and 5700XT 32GB DDR4).
Hey there,
This build looks excellent with all the quality parts. I wouldn't make any significant changes.
The GQ was a decent PSU, though my brother model is 650w. If it's older than five years and still under warranty, replacing it later might be worthwhile.
Check the GPU manufacturer's site for PSU requirements. My 7900xtx red devil suggested a 900W PSU, but I'm using a 1000W one just to be safe—though it might spike sometimes. Personally, I'd opt for a CL30 6000 DDR5 if the budget allows! I currently use a GSKILL Z5 RGB CL30 6000 RGB in a 32GB setup! These CL30 6000 kits are really affordable compared to before.
If you're considering a new 1000watt PSU, it's best to look into top brands for reliability. Whether to opt for a platinum-rated or gold+rated unit depends on your specific needs and budget.
Well, the positive side is that using Zen 4/AM5 will allow you to upgrade up to three times during the socket's life. Intel usually provides no more than two generations of CPU per socket, but this time with the Raptor Lake refresh it does. Either way, having a CPU from AMD or Intel gives you strong performance right now. Of course, there are new chips coming soon, but if you wait too long because of this, you'll miss out on buying anything!
7700 non x is definitely easier to cool, even if it would still reach at least 280mm.
Still, I can personally confirm the noctua NH-U12S Deep cool AK500 digital and the NZXT X63 280mm aio on a 7800x3d with higher TDP than the 7700 non x.
I’ve tested the deep cool AK500 digital paired with NH U12A fans in push-pull configuration (83c-85c Cinebench R23, all core).
The NZXT 280mm X63 is around 81c-82c R23 all core.
The noctua NH-U12A runs about 80c 81c R23.
In my opinion, the 7700 non x likely has a TDP of around 65w, whereas the 7800x3d is 120w, so any cooler should handle it well.
Among the three options for better value, the AK500 offers solid digital temperature reading and a bit more airflow.
Noctua fans are costly, but with seven heat pipes per side compared to five on the AK500, the performance difference is noticeable!
If I had to choose the cheapest option, the AK500 seems like a solid pick for CPU cooling, especially with the extra heat dissipation.
Personally, I’m not a big fan of this generation of 7000 series CPUs and 240mm AIOs.