Build shows significant instability issues.
Build shows significant instability issues.
This was the most significant error I've encountered. As a Zen3 owner who's dealt with countless unstable or erratic Ryzen configurations—including my own—I've noticed RAM instability and BIOS compatibility issues as the primary problems. Most cases stem from this exact situation. Many have become overwhelmed by choices in components for a Ryzen build. When everything aligns perfectly, they can achieve remarkable results. But when things go wrong, it's often just one small detail that causes trouble. I learned the lesson the hard way from receiving incorrect advice, but I adapted. Often, people overlook QVL considerations and simply pick RAM based on appearance, neglecting maximum speeds, timings, or voltages for their specific setup. Usually, Corsair RAM is involved, though that doesn't mean it's always the best option. People tend to focus on aesthetics or speed rather than practical performance. Recently, someone disregarded my advice for a QVL'd 3200 MHz kit and ordered a higher-end version that wasn't QVL'd. They might have a better chance. By the way, the only G.Skill 2x16 kits that are QVL'd for your board are 5200 and 5600 MHz, not 6000. It's wise to remember: system performance mainly depends on a good CPU and GPU match. Unless you're pushing overclocking, RAM speed usually accounts for only a small portion of overall performance. RAM and storage generally impact performance by no more than 5%, and you rarely notice the difference beyond certain speeds. Your budget will be affected more. Ryzen has been quite particular about RAM across most AM4 boards, and I see no reason AM5 would change that—especially with the delayed launch and BIOS concerns. No worries, but AMD hasn't delivered a stable 7GHz AM5 yet, and I won't switch unless it's confirmed. New platforms always have quirks, and AMD insists AM4 will remain the standard. But that's a side note. In short, system stability usually hinges on matching GPU and CPU well. Unless you're chasing extreme overclocks, RAM speed matters little beyond a few gigahertz. Your investment will be the one that counts.
Have you attempted a pace of 5200? If it functions, maintain that speed.
It's an idea worth exploring if they can access the BIOS to turn off DOCP. However, it seems the QVL'd components don't match what's currently installed, which might be even more significant. Edited October 16, 2022 by An0maly_76 Updated with additional details
It functions well when it does. QVL is clearly favored, though in my area most times these kits aren't available or are significantly pricier. I frequently receive kits without QVL certification and push them to the maximum supported official CPU limits.
I agree with the approach of turning off DOCP to check for improvements, which suggests RAM stability if it works. With the new components, I’m worried about potential instability at any speed. It’s hard to say for sure how things would hold up with mismatched part numbers, as similar issues affected my 5900X and 1700 models. I mentioned this after experiencing problems with RAM in those older systems, hoping to fix it soon by clearing up other pending tasks. Updated October 16, 2022 by An0maly_76
Its an EXPO kit designed specifically with Zen4 in mind. That kit you have is just a slightly worse timing wise kit than the kit AMD sent to all reviewers of Zen4 at launch and to be quite honest, no 6000 G.Skill kit is on the QVL list for that board at all which just confirms that they don't test absolutely everything. I'm not seeing any errors in that screenshot so can you confirm where you say you're seeing errors? If so, replace it, but don't get caught up in that QVL list as it historically isn't some kind of guarantee, regardless of what seem to think. The kit linked above works just fine on my 7900x system. What BIOS are you on?