Build not showing up for the Ryzen 5600G
Build not showing up for the Ryzen 5600G
Issue: Red boot light on motherboard. Error 'Input not supported' appears with HDMI display connected via cable, no BIOS visible.
1. System setup: Huntkey 450W PSU, 1000GB SSD NVMe M.2, AMD Ryzen 5600G MSI MAG B550M, MORTAR MAX, Wi-Fi, DDR4 3200G 8Gbps.
2. Troubleshooting actions: Updated BIOS to 7C94v18.zip via flash bios button. Cleared CMOS using a tweezers to connect JBAT1. Uncertain next steps—please advise! Thank you!
Is the motherboard compatible with 1x8GB RAM? Can you reinsert the CPU and power connectors to confirm a secure fit?
Your display typically indicates a lack of connection by showing messages such as "no input" or "no connection." The phrase "input not supported" might seem to imply receiving a signal but is actually unclear about its purpose.
Thank you! The motherboard boots with 1x8GB of RAM installed. You can re-seat the CPU and power cables to ensure a secure fit. I've already done that, focusing on the 24-pin ATX_PWR1 and 8-pin CPU_PWR connections. You're planning to purchase a DP cable and test it on your TV and other displays.
Before setting up Windows 11, the HDMI input wasn't recognized. Once installed, it stopped working until the MSI logo appeared, after which the Windows start screen appeared properly. The display function was functional when the DP was active. The MSI logo would show, followed by the start page.