BSOD occurs roughly every 3 to 5 minutes following a fresh Windows 10 installation.
BSOD occurs roughly every 3 to 5 minutes following a fresh Windows 10 installation.
I encountered a problem with my RAM sticks not functioning properly. The system stopped recognizing them after a recent Windows 10 upgrade. Even after reinserting and changing the slots, it no longer displayed any information. My desktop would freeze in a blue screen every few minutes since the installation. I’ve been using this computer for about three years. Over the last few months, I experienced a blue screen roughly once a week, but I couldn’t pinpoint the cause. This past week it became more frequent, occurring every couple of hours. I’m uncertain whether the issue worsened or if it was just a result of extended usage. I usually power off my machine when not in use—typically six to eight hours—but this week I ran an online backup, keeping it on all day. This might have made the problem more apparent. I followed standard troubleshooting steps: Windows Update, SFC, chkdsk, DISM, memory tests, and reset everything except the boot drive. I connected new drivers and reinstalled Windows 10, but the blue screen persisted. I didn’t see any crashes during safe mode, though several error codes appeared. I’ve been dealing with this for three days now and am running out of ideas. Any advice would be greatly appreciated. Thank you.
Power on in safe mode to determine if the issue persists. If it does, it may be related to drivers. Attempt to update the drivers. If unsuccessful, inspect for damaged system files.
Check if everything is wired correctly. I once faced the same issue and resolved it by disconnecting the GPU from the PCIe slot and reconnecting it. Also, be cautious with overclocking—it can cause problems. If you're dealing with that, consider turning it off until the situation stabilizes.
I considered updating the BIOS, but noticed possible RAM or motherboard issues. Estimated time: probably not long—checking your .dmp in BlueScreenView. Could be a failing SSD too. Do you have another drive available for a fresh Windows installation?
Right now with the latest BIOS installed and no overclocking concerns, it seems like swapping parts might be your next step. This depends on whether you have replacement components available. If you're not in safe mode, most hardware is operating in 'limp-home-mode' using MS's standard drivers. Once a proper driver is in place, the OS will start checking specific hardware features and may identify issues. Do you have spare parts or another reliable system you can test against to see if the problem repeats? If not, do you have someone who can help you with their PC?
Check the bluescreen view for signs of a failing SSD. After reinstalling drivers, it has been running for about half an hour. A deteriorating SSD could be causing the issues you experienced before the Windows reinstall and might also be why the drivers didn’t install properly afterward.
Referenced updates were applied after reinstalling Windows. Following your advice, they were re-downloaded and installed again. The system has operated smoothly for more than half an hour so far. Another user noted potential SSD failure from the logs, suggesting this problem might differ from the previous blue screen incident. A failing SSD could also account for earlier driver installation issues. Appreciate the guidance. It seems this was the case.
It’s mainly about the random bug checks that guide my thoughts. These can stem from many different reasons. Windows sometimes doesn’t install the right driver on its own, which is why it’s usually suggested to get them directly from the maker. I’m sure you did that, but it’s always wise to verify. Also, it might need a few reboots—update and restart a few times—for Windows to fully apply all necessary updates for your system.