BSOD in Handbrake means a system crash occurred during a video editing session.

FlameSquid32
Senior Member

501

12-09-2018, 03:26 AM

You’re experiencing overheating after using HandBrake on a 2600 OCd setup at 4GHz. Since your stock cooler isn’t handling the load, consider upgrading to a better cooling solution or improving airflow. Also, check if your CPU’s thermal paste is still effective and ensure proper fan operation.

FlameSquid32

12-09-2018, 03:26 AM #1

tortadi
Member

156

12-19-2018, 09:43 AM

Reduce the overclock or use default settings and check if overheating persists.

tortadi

12-19-2018, 09:43 AM #2

Reduce the overclock or use default settings and check if overheating persists.

kristinaloveg
Junior Member

12-20-2018, 11:45 PM

kristinaloveg

12-20-2018, 11:45 PM #3

RJB1
Member

12-21-2018, 01:38 AM

80C is the suggested maximum heat level for using a CPU or GPU. I'm just checking how long I can run it safely at that temperature. Personally, 80°C feels a bit too hot for me.

RJB1

12-21-2018, 01:38 AM #4

80C is the suggested maximum heat level for using a CPU or GPU. I'm just checking how long I can run it safely at that temperature. Personally, 80°C feels a bit too hot for me.

parkec11
Member

12-28-2018, 12:28 PM

I added a few fans to the side of the case; the render takes about 25 minutes, but it runs faster at 50 c or less otherwise.

parkec11

12-28-2018, 12:28 PM #5

I added a few fans to the side of the case; the render takes about 25 minutes, but it runs faster at 50 c or less otherwise.

Gustavgurra03
Posting Freak

815

12-28-2018, 05:46 PM

That’s acceptable, but avoid exceeding 80°C for long durations.

Gustavgurra03

12-28-2018, 05:46 PM #6

That’s acceptable, but avoid exceeding 80°C for long durations.

CloseToToast
Member

125

12-29-2018, 02:27 AM

This isn't a correct claim.

CloseToToast

12-29-2018, 02:27 AM #7

This isn't a correct claim.

nene_awesome1
Junior Member

12-29-2018, 03:03 AM

Do you account for the maximum temperature of the TJ Max?

nene_awesome1

12-29-2018, 03:03 AM #8

Do you account for the maximum temperature of the TJ Max?

jpenney7
Member

168

12-31-2018, 02:35 AM

Your general claim doesn't apply to most CPUs and GPUs. The initial assertion was wrong for several reasons.

jpenney7

12-31-2018, 02:35 AM #9

Your general claim doesn't apply to most CPUs and GPUs. The initial assertion was wrong for several reasons.

remelsteur
Junior Member

12-31-2018, 04:01 AM

#10

What a suitable heat range is usually around 80°C, which many consider the maximum safe limit. You're right about aiming for cooler temps—asking others gives a good idea. While the maximum junction temperature might reach 100°C+, you'll notice performance drops due to thermal throttling at those levels.

remelsteur

12-31-2018, 04:01 AM #10