F5F Stay Refreshed Hardware Desktop BSOD happens again, need assistance. Someone can help.

BSOD happens again, need assistance. Someone can help.

BSOD happens again, need assistance. Someone can help.

_
_LyarZRektU_
Member
57
07-15-2021, 09:16 PM
#1
Because no one came to help, we tried again. Besides everything I did, I also checked the VRAM and it worked fine. It only occurs during startup, then restarts and functions properly. If I never turned it off, it wouldn’t happen. See the WhoChrashed report: PLEASE SOME ASSISTANCE. I’m not sure what else to do. P.S. The a sio3.sy s still shows an error from Driver Verifier – IS THAT AN ISSUE??? System spec: Ryzen 5 1600AF (no OC) Asus PRIME A320M-K (6042 BIOS before, now 5606 but didn’t fix it) Kingston HyperX 2x8GB DDR4 3200Mhz CL16 kit (runs at 3200Mhz) ZOTAC GTX 1650 4GB GDDR5 (no OC) Kingston A200 240GB SSD WD 1TB Windows 11 (now) / Windows 10 (previously) happened on both.
_
_LyarZRektU_
07-15-2021, 09:16 PM #1

Because no one came to help, we tried again. Besides everything I did, I also checked the VRAM and it worked fine. It only occurs during startup, then restarts and functions properly. If I never turned it off, it wouldn’t happen. See the WhoChrashed report: PLEASE SOME ASSISTANCE. I’m not sure what else to do. P.S. The a sio3.sy s still shows an error from Driver Verifier – IS THAT AN ISSUE??? System spec: Ryzen 5 1600AF (no OC) Asus PRIME A320M-K (6042 BIOS before, now 5606 but didn’t fix it) Kingston HyperX 2x8GB DDR4 3200Mhz CL16 kit (runs at 3200Mhz) ZOTAC GTX 1650 4GB GDDR5 (no OC) Kingston A200 240GB SSD WD 1TB Windows 11 (now) / Windows 10 (previously) happened on both.

D
Dragonize
Member
181
07-16-2021, 03:02 AM
#2
Consider a new setup at this stage. Checking if you upgraded from Windows 10 or performed a clean install would be wise. If it wasn’t a clean install, proceed with that. After stability testing and confirming no crashes, hardware issues can be ruled out as the cause.
D
Dragonize
07-16-2021, 03:02 AM #2

Consider a new setup at this stage. Checking if you upgraded from Windows 10 or performed a clean install would be wise. If it wasn’t a clean install, proceed with that. After stability testing and confirming no crashes, hardware issues can be ruled out as the cause.

K
KoKo_OJ
Member
206
07-16-2021, 06:40 AM
#3
I performed a fresh setup twice: once on pure Windows 10, then again on a new Windows 11 from scratch.
K
KoKo_OJ
07-16-2021, 06:40 AM #3

I performed a fresh setup twice: once on pure Windows 10, then again on a new Windows 11 from scratch.

P
pandaman06
Member
61
07-22-2021, 03:54 PM
#4
ok.... Can you record this, upload in drive and share the link here? Would help us to figure out what is going on more clearly
P
pandaman06
07-22-2021, 03:54 PM #4

ok.... Can you record this, upload in drive and share the link here? Would help us to figure out what is going on more clearly

D
deathleaf
Member
108
07-26-2021, 11:45 PM
#5
Documenting the initial setup steps or clarifying your request.
D
deathleaf
07-26-2021, 11:45 PM #5

Documenting the initial setup steps or clarifying your request.

Y
Yesyesag_Plays
Member
132
07-27-2021, 04:12 PM
#6
Observing the sequence of events. System begins to malfunction, progressing through various stages until a critical failure occurs.
Y
Yesyesag_Plays
07-27-2021, 04:12 PM #6

Observing the sequence of events. System begins to malfunction, progressing through various stages until a critical failure occurs.

S
spelen02
Junior Member
4
08-04-2021, 12:11 PM
#7
Try a live Linux environment to test the installation. This helps confirm whether it's Windows or a corrupted setup. Alternatively, boot into Windows Safe Mode to resolve driver issues.
S
spelen02
08-04-2021, 12:11 PM #7

Try a live Linux environment to test the installation. This helps confirm whether it's Windows or a corrupted setup. Alternatively, boot into Windows Safe Mode to resolve driver issues.

V
Velizar06
Posting Freak
865
08-04-2021, 01:17 PM
#8
Consider trying Linux or Safe Mode. According to the record, the BSOD appears, it boots to Windows after about 5 seconds, but only after I turn off the PC for a while (such as overnight). If I leave it on for 2 to 3 hours, everything seems normal. Also, after the BSOD, everything functions correctly.
V
Velizar06
08-04-2021, 01:17 PM #8

Consider trying Linux or Safe Mode. According to the record, the BSOD appears, it boots to Windows after about 5 seconds, but only after I turn off the PC for a while (such as overnight). If I leave it on for 2 to 3 hours, everything seems normal. Also, after the BSOD, everything functions correctly.

F
FR0Zos
Member
56
08-16-2021, 12:44 AM
#9
Would you like to know why you might need an Aemour crate installed? All the solutions available through Asus OS software can also be set up via BIOS, making them permanent. This isn't just limited to Windows—similar issues can occur on other systems, and once settings are applied they stop working. It’s best to remove both Armour Crate and Asus AI Suite. If you're using Windows 11, consider also deleting Ryzen Master if it's installed, as the same problems may arise in future updates (like a screen crash).
F
FR0Zos
08-16-2021, 12:44 AM #9

Would you like to know why you might need an Aemour crate installed? All the solutions available through Asus OS software can also be set up via BIOS, making them permanent. This isn't just limited to Windows—similar issues can occur on other systems, and once settings are applied they stop working. It’s best to remove both Armour Crate and Asus AI Suite. If you're using Windows 11, consider also deleting Ryzen Master if it's installed, as the same problems may arise in future updates (like a screen crash).