F5F Stay Refreshed Hardware Desktop Board and processor heat levels Temperature readings for the motherboard and CPU Monitor system cooling performance

Board and processor heat levels Temperature readings for the motherboard and CPU Monitor system cooling performance

Board and processor heat levels Temperature readings for the motherboard and CPU Monitor system cooling performance

F
FunkyEx
Member
Find
73
11-03-2016, 01:51 PM
#1
I've been keeping an eye on my PC's temps lately after installing a new GPU. I was curious about the possibility of overclocking, but things didn't go as planned. The GPU is running well, though both the CPU and motherboard are getting warmer than usual. It's not uncommon for these parts to heat up, especially in our climate, but this time it felt different. When idle, my CPU and motherboard stayed between 45–54°C, with the board consistently higher. Usually my board never exceeded 35–40°C, even when the CPU was pushing it.

Once I launch an app—whether it's Photoshop or Notepad—the board temperature spikes to 65–70°C and the CPU follows. After a while, it cools down slightly, stays steady, or even climbs further. My highest reading on the board reached around 92°C, while my CPU hit about 90°C. This usually happens when I boot Windows or run an Android emulator.

I'm worried about running heavier games and risking damage to my CPU or board. I checked the sensors, touched the board near the CPU, and used another tool (HWiNFO) to confirm the readings. The board's "System" temp was around 40°C, matching Speccy, but the "CPU (PECI)" stayed the same as the other software. This makes me think my CPU might be the culprit, even though the board stays hotter.

I'm unsure if I should be concerned. I've read mixed advice about safe temps, but I'm hoping for a cooler solution before summer heat hits. I'm also worried about the Skylake processor potentially getting damaged with a different cooler. Many people have had similar issues, and I don't want another failure while I can't afford replacements. Thanks for your help!
Reply
Reply
F
FunkyEx
11-03-2016, 01:51 PM #1

I've been keeping an eye on my PC's temps lately after installing a new GPU. I was curious about the possibility of overclocking, but things didn't go as planned. The GPU is running well, though both the CPU and motherboard are getting warmer than usual. It's not uncommon for these parts to heat up, especially in our climate, but this time it felt different. When idle, my CPU and motherboard stayed between 45–54°C, with the board consistently higher. Usually my board never exceeded 35–40°C, even when the CPU was pushing it.

Once I launch an app—whether it's Photoshop or Notepad—the board temperature spikes to 65–70°C and the CPU follows. After a while, it cools down slightly, stays steady, or even climbs further. My highest reading on the board reached around 92°C, while my CPU hit about 90°C. This usually happens when I boot Windows or run an Android emulator.

I'm worried about running heavier games and risking damage to my CPU or board. I checked the sensors, touched the board near the CPU, and used another tool (HWiNFO) to confirm the readings. The board's "System" temp was around 40°C, matching Speccy, but the "CPU (PECI)" stayed the same as the other software. This makes me think my CPU might be the culprit, even though the board stays hotter.

I'm unsure if I should be concerned. I've read mixed advice about safe temps, but I'm hoping for a cooler solution before summer heat hits. I'm also worried about the Skylake processor potentially getting damaged with a different cooler. Many people have had similar issues, and I don't want another failure while I can't afford replacements. Thanks for your help!

Reply
Reply
S
seeker07
Senior Member
Find
349
11-03-2016, 02:23 PM
#2
Use a poor thermal paste and ensure proper case ventilation
Reply
Reply
S
seeker07
11-03-2016, 02:23 PM #2

Use a poor thermal paste and ensure proper case ventilation

Reply
Reply
Q
QueenArticuno
Junior Member
Find
1
11-03-2016, 06:35 PM
#3
I don't believe that. I purchased this thermal paste recently, and the case ventilation works fine. I didn't adjust any fan positions—I have two at the top, one at the back, and another at the front.
Reply
Reply
Q
QueenArticuno
11-03-2016, 06:35 PM #3

I don't believe that. I purchased this thermal paste recently, and the case ventilation works fine. I didn't adjust any fan positions—I have two at the top, one at the back, and another at the front.

Reply
Reply