F5F Stay Refreshed Hardware Desktop black screen on laptop

black screen on laptop

black screen on laptop

M
MisterMeetBoy
Junior Member
20
03-03-2022, 07:02 AM
#1
I adjusted my laptop's resolution from 1600x900 to 1920x1080 and lowered the refresh rate to 144Hz. I also changed the display settings from 60Hz to 144Hz. Despite knowing the screen was only 1600x900 at 60Hz, the change caused the display to go black. I stopped using it after about two hours.
M
MisterMeetBoy
03-03-2022, 07:02 AM #1

I adjusted my laptop's resolution from 1600x900 to 1920x1080 and lowered the refresh rate to 144Hz. I also changed the display settings from 60Hz to 144Hz. Despite knowing the screen was only 1600x900 at 60Hz, the change caused the display to go black. I stopped using it after about two hours.

O
Op_Skillium
Junior Member
23
03-03-2022, 11:12 AM
#2
Connect the laptop to an external screen if available, then adjust its display settings to the correct resolution.
O
Op_Skillium
03-03-2022, 11:12 AM #2

Connect the laptop to an external screen if available, then adjust its display settings to the correct resolution.

_
_OmgItsLuna_
Junior Member
35
03-03-2022, 01:20 PM
#3
No, there is no other way to do it.
_
_OmgItsLuna_
03-03-2022, 01:20 PM #3

No, there is no other way to do it.

R
RagingCoconuts
Member
179
03-05-2022, 02:46 AM
#4
Yes, it displays the bios and then transitions to a black screen upon loading into Windows.
R
RagingCoconuts
03-05-2022, 02:46 AM #4

Yes, it displays the bios and then transitions to a black screen upon loading into Windows.

1
10th_Doctor_
Posting Freak
768
03-06-2022, 11:24 AM
#5
nah just black
1
10th_Doctor_
03-06-2022, 11:24 AM #5

nah just black

R
Rosie_The_Fox
Member
213
03-07-2022, 08:20 AM
#6
The system should remain visible in the BIOS even after a hard restart. It must wait until Windows fully loads before displaying the incompatible resolution. If no BIOS appears at all, that’s a warning sign. How did you adjust the display settings? Was it only through Windows Display Settings or did you use a third-party tool such as Nvidia Control Panel? It’s possible the display panel was damaged during the adjustment, which could mean replacing it might be necessary depending on the laptop’s age, model, and specifications. It may be wiser to purchase a new laptop if needed.
R
Rosie_The_Fox
03-07-2022, 08:20 AM #6

The system should remain visible in the BIOS even after a hard restart. It must wait until Windows fully loads before displaying the incompatible resolution. If no BIOS appears at all, that’s a warning sign. How did you adjust the display settings? Was it only through Windows Display Settings or did you use a third-party tool such as Nvidia Control Panel? It’s possible the display panel was damaged during the adjustment, which could mean replacing it might be necessary depending on the laptop’s age, model, and specifications. It may be wiser to purchase a new laptop if needed.