F5F Stay Refreshed Hardware Desktop Bios resets when power is turned off overnight, though it works if you shut it down for a short time.

Bios resets when power is turned off overnight, though it works if you shut it down for a short time.

Bios resets when power is turned off overnight, though it works if you shut it down for a short time.

K
kervinc
Posting Freak
804
11-25-2021, 06:46 AM
#1
It seems like the system might experience a crash or reset, or there could be a hardware issue.
K
kervinc
11-25-2021, 06:46 AM #1

It seems like the system might experience a crash or reset, or there could be a hardware issue.

O
Okunino
Posting Freak
845
11-25-2021, 06:46 AM
#2
O
Okunino
11-25-2021, 06:46 AM #2

T
Tommy6774
Member
161
11-25-2021, 06:46 AM
#3
The replaced post has already been updated with the new content.
T
Tommy6774
11-25-2021, 06:46 AM #3

The replaced post has already been updated with the new content.

P
pixelboy_pvpz
Junior Member
6
11-25-2021, 06:46 AM
#4
It might be the RAM model you're running, since the system doesn't recognize your version.
P
pixelboy_pvpz
11-25-2021, 06:46 AM #4

It might be the RAM model you're running, since the system doesn't recognize your version.

T
toughguy111269
Member
121
11-25-2021, 06:46 AM
#5
The problem remains consistent. The system restarts after a BIOS boot, erasing its settings.
T
toughguy111269
11-25-2021, 06:46 AM #5

The problem remains consistent. The system restarts after a BIOS boot, erasing its settings.

X
xRemyMC
Junior Member
24
11-25-2021, 06:46 AM
#6
PC specifications include an AMD Ryzen Threadripper 3970X with 32 cores, 64GB RAM (4x16GB), DDR4 DRAM at 3200MHz, Sapphire Radeon RX 6700 XT graphics card, Nitro Gaming OC, and a Samsung SSD 980 PRO with 1TB. BIOS version is FC 11/23/2021.
X
xRemyMC
11-25-2021, 06:46 AM #6

PC specifications include an AMD Ryzen Threadripper 3970X with 32 cores, 64GB RAM (4x16GB), DDR4 DRAM at 3200MHz, Sapphire Radeon RX 6700 XT graphics card, Nitro Gaming OC, and a Samsung SSD 980 PRO with 1TB. BIOS version is FC 11/23/2021.

L
Lorekay_BR
Junior Member
41
11-25-2021, 06:46 AM
#7
Before proceeding, verify and swap the CMOS battery if needed—aim for a voltage above 2.9 volts. Ensure all connections in the battery compartment are clean and the tension spring is properly engaging so the battery sits securely within its holder. If the spring feels loose or wobbly, gently pull upward on the bottom of the holder to tighten it. Avoid over-tightening; the goal is a snug but comfortable fit.
L
Lorekay_BR
11-25-2021, 06:46 AM #7

Before proceeding, verify and swap the CMOS battery if needed—aim for a voltage above 2.9 volts. Ensure all connections in the battery compartment are clean and the tension spring is properly engaging so the battery sits securely within its holder. If the spring feels loose or wobbly, gently pull upward on the bottom of the holder to tighten it. Avoid over-tightening; the goal is a snug but comfortable fit.