F5F Stay Refreshed Power Users Overclocking BIOS refuses to allow a 4.5ghz overclock for the Z87X-UD4h + i5 4670k.

BIOS refuses to allow a 4.5ghz overclock for the Z87X-UD4h + i5 4670k.

BIOS refuses to allow a 4.5ghz overclock for the Z87X-UD4h + i5 4670k.

P
Proxulity
Junior Member
16
12-26-2016, 02:38 PM
#1
My problem is that when reviewing the screenshots, it appears I achieved a successful overclock to 4.4ghz at 1.200V. However, upon checking my BIOS images, I see the input as 4.5ghz, yet the motherboard fails to save and boot those settings. The only solution is using an OC software within Windows, which is quite inconvenient. I attempted to restart with default settings, which restored everything to normal. I then tried again at 4.4ghz, but it didn’t work for 4.5ghz afterward.
P
Proxulity
12-26-2016, 02:38 PM #1

My problem is that when reviewing the screenshots, it appears I achieved a successful overclock to 4.4ghz at 1.200V. However, upon checking my BIOS images, I see the input as 4.5ghz, yet the motherboard fails to save and boot those settings. The only solution is using an OC software within Windows, which is quite inconvenient. I attempted to restart with default settings, which restored everything to normal. I then tried again at 4.4ghz, but it didn’t work for 4.5ghz afterward.

N
NinatoPvP
Posting Freak
899
12-26-2016, 08:35 PM
#2
The traditional method requires additional effort to achieve stability. Consider trying 1600 on the memory.
N
NinatoPvP
12-26-2016, 08:35 PM #2

The traditional method requires additional effort to achieve stability. Consider trying 1600 on the memory.

Z
zWeeek_
Member
50
12-27-2016, 12:04 AM
#3
You might consider testing the beta bios F10b or perform a minor bclk overclock. Even a small overclock of just 2 bclk could reach 4.49Ghz. Based on my experiments, 4 is likely the highest achievable, so reaching 4.6Ghz seems unlikely.
Z
zWeeek_
12-27-2016, 12:04 AM #3

You might consider testing the beta bios F10b or perform a minor bclk overclock. Even a small overclock of just 2 bclk could reach 4.49Ghz. Based on my experiments, 4 is likely the highest achievable, so reaching 4.6Ghz seems unlikely.

A
Aerithix
Member
182
12-28-2016, 12:52 PM
#4
You have options to either attempt the beta bios F10b or perform a minor bclk overclock. A small overclock of just 2 bclk could reach 4.49Ghz. Based on my tests, 4 is likely the maximum achievable, so reaching 4.6Ghz seems unlikely.

It's interesting I didn't remember trying a 4.5ghz setting when I first began overclocking. It functioned temporarily but wasn't stable, so I returned to 4.2ghz for some time. Recently, I attempted 4.4ghz again, probably because it's getting warmer—temperatures are around 70-73°C. I was hoping to reach 4.5ghz but the motherboard won't boot that setting even after saving. It only supports up to 4.4ghz.

Should I consider clearing the CMOS? I'm not sure if that would help.
A
Aerithix
12-28-2016, 12:52 PM #4

You have options to either attempt the beta bios F10b or perform a minor bclk overclock. A small overclock of just 2 bclk could reach 4.49Ghz. Based on my tests, 4 is likely the maximum achievable, so reaching 4.6Ghz seems unlikely.

It's interesting I didn't remember trying a 4.5ghz setting when I first began overclocking. It functioned temporarily but wasn't stable, so I returned to 4.2ghz for some time. Recently, I attempted 4.4ghz again, probably because it's getting warmer—temperatures are around 70-73°C. I was hoping to reach 4.5ghz but the motherboard won't boot that setting even after saving. It only supports up to 4.4ghz.

Should I consider clearing the CMOS? I'm not sure if that would help.

C
Carnlife
Junior Member
29
12-28-2016, 01:23 PM
#5
Could you confirm if the 44 ratio remains effective when the motherboard speed is raised to 102?
C
Carnlife
12-28-2016, 01:23 PM #5

Could you confirm if the 44 ratio remains effective when the motherboard speed is raised to 102?

G
190
12-31-2016, 08:27 AM
#6
Will maintaining a 44 ratio help if the motherboard speed is raised to 102? It won't post. My RAM was overclocked from 1866MHz to around 1900MHz, which seems to be the reason for the crash. However, yes, it does save the settings.
G
gustavbengters
12-31-2016, 08:27 AM #6

Will maintaining a 44 ratio help if the motherboard speed is raised to 102? It won't post. My RAM was overclocked from 1866MHz to around 1900MHz, which seems to be the reason for the crash. However, yes, it does save the settings.

H
Hoewls
Member
145
12-31-2016, 08:52 AM
#7
The traditional method requires additional effort to achieve stability. Consider trying 1600 on the memory.
H
Hoewls
12-31-2016, 08:52 AM #7

The traditional method requires additional effort to achieve stability. Consider trying 1600 on the memory.