F5F Stay Refreshed Hardware Desktop Bios only shows 0GB of DDR4_A1 memory, while the operating system contains 1.83 GB.

Bios only shows 0GB of DDR4_A1 memory, while the operating system contains 1.83 GB.

Bios only shows 0GB of DDR4_A1 memory, while the operating system contains 1.83 GB.

M
Mr_Luzgar
Member
58
03-07-2018, 01:24 AM
#1
You're experiencing memory issues on your ASRock B450 gaming board. The BIOS reports 0GB and 8GB slots, but only 1.83GB is visible. After trying CMOS reset, swapping RAM sticks, and adjusting the CPU cooler, the problem persists. It seems the memory module might not be seated correctly or there could be a hardware fault. Consider checking the RAM installation, testing with a different RAM stick, or consulting the manufacturer's support for further diagnosis.
M
Mr_Luzgar
03-07-2018, 01:24 AM #1

You're experiencing memory issues on your ASRock B450 gaming board. The BIOS reports 0GB and 8GB slots, but only 1.83GB is visible. After trying CMOS reset, swapping RAM sticks, and adjusting the CPU cooler, the problem persists. It seems the memory module might not be seated correctly or there could be a hardware fault. Consider checking the RAM installation, testing with a different RAM stick, or consulting the manufacturer's support for further diagnosis.

D
203
03-15-2018, 10:57 PM
#2
It’s unclear whether the stick in slot A1 reports zero GB or if this applies to any slot. It seems like a faulty device or memory card might be involved.
D
demenciossauro
03-15-2018, 10:57 PM #2

It’s unclear whether the stick in slot A1 reports zero GB or if this applies to any slot. It seems like a faulty device or memory card might be involved.

M
MasTerH200
Member
211
03-15-2018, 11:56 PM
#3
Apologies for the mix-up. The slot displays 0GB no matter which stick you use. It worked before the new CPU, and testing the old one shows the same issue—bios updates might have disabled it.
M
MasTerH200
03-15-2018, 11:56 PM #3

Apologies for the mix-up. The slot displays 0GB no matter which stick you use. It worked before the new CPU, and testing the old one shows the same issue—bios updates might have disabled it.

F
Flam3r101
Junior Member
13
03-23-2018, 07:55 PM
#4
Since 8.01 is already a beta release, it's probably best to wait for later updates. I think 8.01 came out before the 5700x3d version, which could explain this issue.
F
Flam3r101
03-23-2018, 07:55 PM #4

Since 8.01 is already a beta release, it's probably best to wait for later updates. I think 8.01 came out before the 5700x3d version, which could explain this issue.

R
rEalLy_Cr4zY
Member
112
03-23-2018, 10:23 PM
#5
The newest update remains unchanged, identical narrative continues.
R
rEalLy_Cr4zY
03-23-2018, 10:23 PM #5

The newest update remains unchanged, identical narrative continues.

G
GabeNewells
Member
55
03-23-2018, 10:43 PM
#6
That sounds concerning. Do you still have the previous CPU model?
G
GabeNewells
03-23-2018, 10:43 PM #6

That sounds concerning. Do you still have the previous CPU model?

T
T___________T
Member
224
03-24-2018, 02:29 PM
#7
I also have it, 2700x. I repeated the process, same outcome. Just got lucky and managed to retrieve a CMOS cable, but after 10 minutes it seems ineffective too.
T
T___________T
03-24-2018, 02:29 PM #7

I also have it, 2700x. I repeated the process, same outcome. Just got lucky and managed to retrieve a CMOS cable, but after 10 minutes it seems ineffective too.