F5F Stay Refreshed Hardware Desktop BIOS issues appear consistently after the system powers off.

BIOS issues appear consistently after the system powers off.

BIOS issues appear consistently after the system powers off.

K
kaaskotskikker
Posting Freak
795
12-10-2022, 01:07 AM
#1
Hello. After performing a cold boot, I encounter the popup indicating a corrupted main BIOS. Can you suggest a solution? Motherboard model: Gigabyte GA-B75M-D3V (rev. 1.1).
K
kaaskotskikker
12-10-2022, 01:07 AM #1

Hello. After performing a cold boot, I encounter the popup indicating a corrupted main BIOS. Can you suggest a solution? Motherboard model: Gigabyte GA-B75M-D3V (rev. 1.1).

K
Kool
Member
156
12-10-2022, 08:24 AM
#2
The board could contain two bios chips, though it seems the CMOS might be missing. Swap the battery (likely a CR2031) if needed.
K
Kool
12-10-2022, 08:24 AM #2

The board could contain two bios chips, though it seems the CMOS might be missing. Swap the battery (likely a CR2031) if needed.

G
Gabokazu
Posting Freak
814
12-11-2022, 03:24 PM
#3
It could be a simple mistake, but I attempted to exchange two HDDs—one running Windows 7 and the other Windows 10. After swapping, the drive with Windows 7 would freeze and restart. When I put the original Windows 10 drive back in, the problem returned. Might this indicate an issue with the HDD swapping process?
G
Gabokazu
12-11-2022, 03:24 PM #3

It could be a simple mistake, but I attempted to exchange two HDDs—one running Windows 7 and the other Windows 10. After swapping, the drive with Windows 7 would freeze and restart. When I put the original Windows 10 drive back in, the problem returned. Might this indicate an issue with the HDD swapping process?

A
Andrea_ruiz100
Member
50
12-11-2022, 04:17 PM
#4
A
Andrea_ruiz100
12-11-2022, 04:17 PM #4

F
FoxPlayer10
Junior Member
41
12-11-2022, 05:20 PM
#5
F
FoxPlayer10
12-11-2022, 05:20 PM #5

S
SirCheesington
Junior Member
8
12-12-2022, 04:38 PM
#6
Access the BIOS settings and revert the RAM to its standard configuration. It may also help to physically move the RAM slots and execute memtest86 to check for any issues.
S
SirCheesington
12-12-2022, 04:38 PM #6

Access the BIOS settings and revert the RAM to its standard configuration. It may also help to physically move the RAM slots and execute memtest86 to check for any issues.

O
ofeliant
Member
174
12-13-2022, 12:26 AM
#7
You only changed the CMOS battery and it’s stuck in a loop. Did you mess up the BIOS settings, or should you replace the battery and try again?
O
ofeliant
12-13-2022, 12:26 AM #7

You only changed the CMOS battery and it’s stuck in a loop. Did you mess up the BIOS settings, or should you replace the battery and try again?

F
Fin_poika
Member
69
12-14-2022, 10:00 AM
#8
Rephrasing your request:

Adjust the wording to convey the same idea differently.
F
Fin_poika
12-14-2022, 10:00 AM #8

Rephrasing your request:

Adjust the wording to convey the same idea differently.