beyond XMP. Is this good or meh?

Pages (3): 1 2 3 Next

tamemarco
Senior Member

482

04-15-2019, 02:21 AM

After a year of dealing with high GPU costs, I began experimenting with overclocking. I upgraded my CPU and GPU and then moved on to the RAM. Currently, I have two 8GB G Skill Trident 3600 RGB boards at 1.35V, running at 4000 MHz with the same voltage. My question is whether this setup is strong or just mediocre.

tamemarco

04-15-2019, 02:21 AM #1

Larnyy
Member

04-27-2019, 01:26 PM

I believe the 3800 C17 will function exactly as expected.

Larnyy

04-27-2019, 01:26 PM #2

I believe the 3800 C17 will function exactly as expected.

BadBoiInLA
Junior Member

04-28-2019, 11:10 AM

Nope, 3800 C17 would run a bit quicker—around 1% faster.

BadBoiInLA

04-28-2019, 11:10 AM #3

Nope, 3800 C17 would run a bit quicker—around 1% faster.

Eipee
Junior Member

04-28-2019, 11:49 AM

The setup at 4000 C17/16 with 1.37 volts is stable.

Eipee

04-28-2019, 11:49 AM #4

The setup at 4000 C17/16 with 1.37 volts is stable.

Gawai
Junior Member

04-28-2019, 12:02 PM

I haven't tested it yet. It's a Samsung B-Die, so I might be able to try it out. At 1.35 volts, the maximum is around 4000 CAS 18.

Gawai

04-28-2019, 12:02 PM #5

I haven't tested it yet. It's a Samsung B-Die, so I might be able to try it out. At 1.35 volts, the maximum is around 4000 CAS 18.

JYSG
Member

171

05-10-2019, 02:53 PM

Great setup, keeping it around 17-17-17-37 with a 1.37v pace on 4000 time for that OCCT run.

JYSG

05-10-2019, 02:53 PM #6

Great setup, keeping it around 17-17-17-37 with a 1.37v pace on 4000 time for that OCCT run.

Flamedblaze0
Junior Member

05-12-2019, 11:25 AM

That's the best I could do. If C16 works, that's fine, but I'd test 1.36v first to check for a boot. 1.37 is a bit higher than the usual comfortable driving voltage.

Flamedblaze0

05-12-2019, 11:25 AM #7

That's the best I could do. If C16 works, that's fine, but I'd test 1.36v first to check for a boot. 1.37 is a bit higher than the usual comfortable driving voltage.

KeeezZ
Junior Member

05-14-2019, 06:41 AM

I believe 17-17-17-37 at 4000mhz with 1.37v is the limit. I attempted to reduce the voltage but had no success. It’s unclear if 1.37v is safe. I’ve heard these Samsung batteries are rated for 1.4v.

KeeezZ

05-14-2019, 06:41 AM #8

ewok_du_56
Junior Member

05-25-2019, 01:36 PM

I’d feel comfortable reaching up to 1.45V for regular tasks.

ewok_du_56

05-25-2019, 01:36 PM #9

I’d feel comfortable reaching up to 1.45V for regular tasks.

DankKoala
Junior Member

05-29-2019, 08:53 PM

#10

Case 17 4000 at 1.37 did not pass the test. I switched back to my previous configuration.

DankKoala

05-29-2019, 08:53 PM #10

Case 17 4000 at 1.37 did not pass the test. I switched back to my previous configuration.

Pages (3): 1 2 3 Next