Basic af home network help
Basic af home network help
I reside in England, where we connect to the internet via telephone lines. My setup uses an RJ11 connection that feeds into a modem, which then links to RJ11 to RJ45 cables. These pass through several devices before reaching the router. Would it still function without the BT modem and instead use a TP-Link router? Are there additional components required for this configuration? The suggested RJ11 to RJ45 setup is available on Amazon, along with the powerline adapter and TP-Link router links provided.
You cannot transmit a synchronized DSL signal via an ethernet powerline adapter. These are two distinct protocols. Plus, each adapter, cable, and connection degrades the signal further. When swapping your modem, you'll need a device that matches your ISP's standard—most often VDSL2. You can easily change it without issues. In Germany, TAE is typically used for DSL, which is a separate standard. I changed mine to RJ45.
Sure, you can use an RJ11 to RJ45 adapter to connect your router to a powerline adapter. This setup lets you place your router anywhere in your home as long as it meets your ISP's requirements. Your challenge is that the front extension outside your main wall has weak or no signal. Moving your router to the center of the house should improve coverage without needing cables through walls or floors.
You should connect your router directly to the modem, then link it via powerline adapter to the access point. Changing the Archer C50 router to something else isn't necessary unless you have a specific reason.
This configuration doesn’t include a modem. You’ll need one to link your ISP with the router. I can set up a mesh network or add several access points for better coverage.
These connectors are just for linking cables to various devices and networks. You should plug the incoming cable straight into your modem. Adapters can switch connectors or add extensions, but you can't rely on powerline to boost the signal since the modem needs a stable DSL connection. If something blocks the path, it won’t work anymore. Some devices handle this, but it’s not common. Once connected to your ISP, you can use the signal for Ethernet, switches, routers, or PCs. The typical path is: Wallplug (RJ11, RJ45, etc.) → Modem → Router → Powerline Adapter → Powerline Adapter 2 → Router → whatever you need.