F5F Stay Refreshed Hardware Desktop B650e Taichi Lite ATX version

B650e Taichi Lite ATX version

B650e Taichi Lite ATX version

M
Macattack1972
Member
140
01-17-2023, 11:06 AM
#1
I've been searching for a motherboard compatible with 7800X3D and Taichi caught my attention, but it doesn't fit in my case (define s). Are there any similar boards with standard ATX dimensions? I found the Gigabyte B650E Aorus Master, though it's pricier. The Asus ROG Strix B650E-E is a bit cheaper than Taichi and offers most of the same specs, but some users reported issues and poor support from Asus. Do you have other suggestions? You're looking for extra features like debug codes display and improved audio codecs compared to cheaper boards.
M
Macattack1972
01-17-2023, 11:06 AM #1

I've been searching for a motherboard compatible with 7800X3D and Taichi caught my attention, but it doesn't fit in my case (define s). Are there any similar boards with standard ATX dimensions? I found the Gigabyte B650E Aorus Master, though it's pricier. The Asus ROG Strix B650E-E is a bit cheaper than Taichi and offers most of the same specs, but some users reported issues and poor support from Asus. Do you have other suggestions? You're looking for extra features like debug codes display and improved audio codecs compared to cheaper boards.

C
Charliemc909
Posting Freak
898
01-19-2023, 05:22 AM
#2
Exactly checking the same boards for my AM5 build turned out to be the top high-end B650 options. The Asus Strix was preferred because its lane configuration feels more adaptable. I settled on the X670E and bought the Asus Strix E-E since it was cheaper—about 440 euros including tax, which is under 400 euros. Sure, ASUS had some issues with their AM5 BIOS XMP settings, but they corrected it quickly despite their initial approach. Another good pick would be the Asus ProArt—they’re also solid choices.
C
Charliemc909
01-19-2023, 05:22 AM #2

Exactly checking the same boards for my AM5 build turned out to be the top high-end B650 options. The Asus Strix was preferred because its lane configuration feels more adaptable. I settled on the X670E and bought the Asus Strix E-E since it was cheaper—about 440 euros including tax, which is under 400 euros. Sure, ASUS had some issues with their AM5 BIOS XMP settings, but they corrected it quickly despite their initial approach. Another good pick would be the Asus ProArt—they’re also solid choices.

L
liseypop
Member
214
01-25-2023, 01:26 PM
#3
The problems with that board I know were mainly about the SOC voltage. It turned out AMD provided safe voltage limits that proved unsafe, which affected all vendors. ASUS chose to always run at the maximum safe voltage, claiming it helped memory compatibility—though that wasn’t a major concern for them. When it became clear it wasn’t safe, their products failed most CPUs and they mishandled the PR response. This situation happened over a year ago now, and it’s no longer a big issue. If you need an ATX board with an on-board POST code, this is the most affordable choice. For those avoiding ASUS, the X670E Carbon is the pricier alternative, or you could look for a lower-end MSI board with JDASH1 and try contacting MSI staff directly.
L
liseypop
01-25-2023, 01:26 PM #3

The problems with that board I know were mainly about the SOC voltage. It turned out AMD provided safe voltage limits that proved unsafe, which affected all vendors. ASUS chose to always run at the maximum safe voltage, claiming it helped memory compatibility—though that wasn’t a major concern for them. When it became clear it wasn’t safe, their products failed most CPUs and they mishandled the PR response. This situation happened over a year ago now, and it’s no longer a big issue. If you need an ATX board with an on-board POST code, this is the most affordable choice. For those avoiding ASUS, the X670E Carbon is the pricier alternative, or you could look for a lower-end MSI board with JDASH1 and try contacting MSI staff directly.

S
stargladeESP
Member
55
01-26-2023, 01:28 PM
#4
Alright, I'll take it. Cheers!
S
stargladeESP
01-26-2023, 01:28 PM #4

Alright, I'll take it. Cheers!