F5F Stay Refreshed Hardware Desktop B550 Aorus Elite V2 code: long one short, short three times

B550 Aorus Elite V2 code: long one short, short three times

B550 Aorus Elite V2 code: long one short, short three times

M
Mr_Individual
Junior Member
17
01-31-2020, 12:09 AM
#1
Hi, I just updated the BIOS to F15c on my computer. After the change, I can't see the POST screen and can't enter the BIOS. I noticed that a single long beep followed by three short beeps indicates a GPU error, but everything worked fine before. I attempted to downgrade to an older BIOS version for this motherboard, but the same error persists on each update. Could someone with this motherboard help? If you have the BIOS file, please share it—I didn't back it up before the update. Short PC Specs: CPU - AMD Ryzen 5 5600x RAM - Kingston HyperX 3200MHz (2x8GB) GPU - Asus GeForce GTX 760. Thanks in advance for your assistance.
M
Mr_Individual
01-31-2020, 12:09 AM #1

Hi, I just updated the BIOS to F15c on my computer. After the change, I can't see the POST screen and can't enter the BIOS. I noticed that a single long beep followed by three short beeps indicates a GPU error, but everything worked fine before. I attempted to downgrade to an older BIOS version for this motherboard, but the same error persists on each update. Could someone with this motherboard help? If you have the BIOS file, please share it—I didn't back it up before the update. Short PC Specs: CPU - AMD Ryzen 5 5600x RAM - Kingston HyperX 3200MHz (2x8GB) GPU - Asus GeForce GTX 760. Thanks in advance for your assistance.

O
Omarhh
Member
217
01-31-2020, 06:26 AM
#2
I hope you did that. Let me know if you need any further help!
O
Omarhh
01-31-2020, 06:26 AM #2

I hope you did that. Let me know if you need any further help!

K
KillTheGamer
Junior Member
1
02-01-2020, 10:06 AM
#3
Refer to the official Gigabyte documentation. I agree with this approach. Retrieve the GPU, reset the CMOS, install it, and attempt again. If issues persist, re-flash using q-flash with the newest release. Allow ample time for completion. Always follow the guidelines.
K
KillTheGamer
02-01-2020, 10:06 AM #3

Refer to the official Gigabyte documentation. I agree with this approach. Retrieve the GPU, reset the CMOS, install it, and attempt again. If issues persist, re-flash using q-flash with the newest release. Allow ample time for completion. Always follow the guidelines.

Y
YourPassword
Member
55
02-02-2020, 08:59 PM
#4
I attempted just to reset the CMOS. I’ll check your advice and let you know the outcome. Appreciate your feedback!
Y
YourPassword
02-02-2020, 08:59 PM #4

I attempted just to reset the CMOS. I’ll check your advice and let you know the outcome. Appreciate your feedback!

U
unforg1ven
Junior Member
8
02-10-2020, 03:04 AM
#5
The GPU re-seat attempt had no effect. I updated the BIOS but nothing altered. The manual offers limited guidance—it only explains assembling the computer using this board, with no troubleshooting steps. I should have noted earlier that Windows starts properly.
U
unforg1ven
02-10-2020, 03:04 AM #5

The GPU re-seat attempt had no effect. I updated the BIOS but nothing altered. The manual offers limited guidance—it only explains assembling the computer using this board, with no troubleshooting steps. I should have noted earlier that Windows starts properly.

D
Ddtod
Junior Member
5
02-17-2020, 03:27 AM
#6
Your system appears to start with GPU functionality after Windows loads, possibly because the card lacks a UEFI GOP. It's unclear how the card gets initialized after installation. You might want to verify this setting in GPUZ to confirm.
D
Ddtod
02-17-2020, 03:27 AM #6

Your system appears to start with GPU functionality after Windows loads, possibly because the card lacks a UEFI GOP. It's unclear how the card gets initialized after installation. You might want to verify this setting in GPUZ to confirm.

H
HeatherHannah
Member
194
02-21-2020, 01:35 AM
#7
The verification is confirmed.
H
HeatherHannah
02-21-2020, 01:35 AM #7

The verification is confirmed.