F5F Stay Refreshed Power Users Overclocking Attempting to overclock an i7 4770 (non K) on a B85-G41 PC Mate using BIOS version 2.9

Attempting to overclock an i7 4770 (non K) on a B85-G41 PC Mate using BIOS version 2.9

Attempting to overclock an i7 4770 (non K) on a B85-G41 PC Mate using BIOS version 2.9

R
Reveng_Gamer
Junior Member
6
04-30-2016, 11:48 AM
#1
I've been checking around and most people agree you can overclock a non-K processor. I understand the risks and everything else, but I just want to be able to do it a bit. I tried increasing the core voltage by .035v, but it didn't seem to help with my PC specs.
R
Reveng_Gamer
04-30-2016, 11:48 AM #1

I've been checking around and most people agree you can overclock a non-K processor. I understand the risks and everything else, but I just want to be able to do it a bit. I tried increasing the core voltage by .035v, but it didn't seem to help with my PC specs.

M
MikeDragon159
Senior Member
661
04-30-2016, 10:50 PM
#2
I used to be able to use a non-K CPU until Haswell. Sandy Bridge and Ivy Bridge could be overclocked up to 400mhz on suitable motherboards... I did this with an i5-2400 and an i7 3770.

Your B85 board probably doesn’t have any OC options in the UEFI, so you’d need a Z87 or Z97 for that.

The only way would be to increase the base clock, which is just a waste of time, patience, and energy.

Don't run that CPU at 1.35v. There’s no reason unless you’re trying to possibly shorten its lifespan. Turn it down as soon as possible.
M
MikeDragon159
04-30-2016, 10:50 PM #2

I used to be able to use a non-K CPU until Haswell. Sandy Bridge and Ivy Bridge could be overclocked up to 400mhz on suitable motherboards... I did this with an i5-2400 and an i7 3770.

Your B85 board probably doesn’t have any OC options in the UEFI, so you’d need a Z87 or Z97 for that.

The only way would be to increase the base clock, which is just a waste of time, patience, and energy.

Don't run that CPU at 1.35v. There’s no reason unless you’re trying to possibly shorten its lifespan. Turn it down as soon as possible.

G
guguis_3000
Member
145
05-01-2016, 02:49 AM
#3
You need to increase the fsb, but I strongly advise against it. It adds an extra burden on your whole system, and the real overclocking wouldn't improve performance at all.
G
guguis_3000
05-01-2016, 02:49 AM #3

You need to increase the fsb, but I strongly advise against it. It adds an extra burden on your whole system, and the real overclocking wouldn't improve performance at all.

R
RageGlitch
Posting Freak
771
05-01-2016, 06:06 AM
#4
I used to be able to use a non-K CPU until Haswell. Sandy Bridge and Ivy Bridge could reach up to 400MHz on the right motherboard... I did this with an i5-2400 and an i7 3770.

Your B85 board probably doesn’t have any overclocking options in the UEFI, you’d need a Z87 or Z97.

The only solution would be increasing the base clock, which is just a waste of time, patience, and energy.
Don’t run that CPU at 1.35V. There’s no reason unless you’re trying to possibly shorten its lifespan. Lower it as soon as possible.
R
RageGlitch
05-01-2016, 06:06 AM #4

I used to be able to use a non-K CPU until Haswell. Sandy Bridge and Ivy Bridge could reach up to 400MHz on the right motherboard... I did this with an i5-2400 and an i7 3770.

Your B85 board probably doesn’t have any overclocking options in the UEFI, you’d need a Z87 or Z97.

The only solution would be increasing the base clock, which is just a waste of time, patience, and energy.
Don’t run that CPU at 1.35V. There’s no reason unless you’re trying to possibly shorten its lifespan. Lower it as soon as possible.

X
xEpicSniiperz
Member
65
05-01-2016, 08:45 AM
#5
You can adjust the base clock, but it becomes unstable quite rapidly... only up to 2-3%... I don't think about it with the T & E.
X
xEpicSniiperz
05-01-2016, 08:45 AM #5

You can adjust the base clock, but it becomes unstable quite rapidly... only up to 2-3%... I don't think about it with the T & E.