Attempting to assemble a computer, but it won't power on.
Attempting to assemble a computer, but it won't power on.
Start watching at the 1:32 mark. There are additional timestamps available for GPU usage and likely CPU as well. I’m not certain what device you connected, but the information provided should be sufficient for troubleshooting.
Check if any part is turning on or reacting when you press the power switch. Make sure the power button connector is securely connected. I’ve adjusted it several times before.
is your PSU switched on at the back then? also, there is a tiny bit of space showing on the 24pin it looks like. Can you get it seated fully without destroying stuff? 24pins are a pain in the butt. Probably not the issue, but since were all here spitballing ideas its worth a shot EDIT: damn cupcakez.. beat me to it lol.
If nothing lights up or makes any noise then you have no power Either nothing at the wall, or PSU not plugged or not working, or main 24pin not properly plugged or board don't work Have to test all that...
Tools for verifying power are usually missing. Likely the issue lies with the 24-pin connector that’s tricky to connect. Remove the board, including the CPU, RAM, SSD, and cooler. Attach the PSU cables, and you should be able to power it using a screwdriver by connecting the front I/O pins.