Attempted to perform OCR scanning but encountered issues.
Attempted to perform OCR scanning but encountered issues.
I attempted to push my new nvidia gigabyte 3060 rtx overclock using afterburner oc. I expected it would take some time, so I was resting on my bed while the process ran. Around twenty minutes passed before my monitor shut down, which I assumed triggered sleep mode. After checking more closely, I realized the monitor wasn’t receiving any signal and that my keyboard and mouse RGB settings were off. This indicated my USB ports weren’t functioning either. Inside the PC, all fans were spinning, including the CPU fan, and the GPU RGB stayed active. The only noticeable change was that the motherboard light displayed a steady yellow. I turned it off and back on, but the light now stays red to yellow. There were no beeps or sounds when it started.
What I tried:
- Removed the GPU and reinstalled it
- Checked if it would work with core i9 integrated graphics
- Removed both RAM sticks and reinstalled
- Swapped out RAM in the fourth slot and powered it back on
- Replaced PCIe slots for both the CPU and GPU and reinstalled
- Removed CMOS battery for five minutes before reinserting
I also downloaded the latest GPU driver version before starting the OC scan.
My system specs are:
- 2x GB Evo RAM sticks
- Nvidia gigabyte 3060 rtx 2.0
- Intel core i7-11700f @ 2.5 GHz, 8-core
- Prime b660-plus D4
- 600W power supply