Attempted to modify bios but no post was created.
Attempted to modify bios but no post was created.
This guide does not include the FlashBack feature and lacks a dedicated button. https://dlcdnets.asus.com/pub/ASUS/mb/So...170606.pdf The only suggestion is to rebuild it to its standard state. Disconnect the power supply, remove the battery, reset the CMOS for 10 seconds, let the battery sit out for 10 minutes, then reinstall and power on.
Really, it’s disappointing I suggested the BIOS update. These updates are usually reliable, and users with Ryzen chips often apply them more frequently. I’ve successfully updated the BIOS multiple times across two Ryzen systems. Thank you for bringing this to my attention.
You're a great person, I just finished the RMA process. I'll keep you updated on the progress and reach out if I require any assistance.
I replaced a few boards before. One was an Asus AM3, a really simple motherboard. I was trying to overclock it with various BIOSes in hopes of getting higher CPU speeds. It ended up being completely unusable. It would power on but the fans wouldn’t spin and nothing else happened. Luckily, I managed to recover the BIOS from the disk and saved the board. When you go to the RMA service, make sure to ask for the newest BIOS and have the board tested. Take a photo of the sticker so you know whether they’ll send a replacement or just repair your old one. I’ve got at least three boards like this. None are posting, no BIOS updates, no new chips—just dead boards.
The main goal was to upgrade the BIOS since the system had only 3200 MHz RAM and was limited to 2100 MHz. Running DOCP caused the computer to boot into safe mode. You wonder if the 450W PSU might be the issue.