ASUS Strix Z790-E Questions
ASUS Strix Z790-E Questions
Hello, I'm working on setting up a new system and just placed the Strix z790-E motherboard. I have some questions that would be helpful. I have a Gen 4 M.2 drive and need guidance on which slot to install it in (m2._2) to keep PCIe lane speed intact. Should I register the motherboard on the ASUS website for future support? I notice the motherboard has three 3.2 USB internal headers, but my O11 XL front panel uses 3.1 connectors—will that work? Can I switch from USB 3 to USB 2 internally to support the Lian Li UniFan controller? How do I adjust the CPI undervoltage in the BIOS? What’s the best way to update the BIOS to the latest version? I read it’s necessary to install Intel ME before updating the BIOS—what is Intel ME and when should I use it? Do I need GSkillz RGB RAM for Aura sync? Is there extra software required for Aura to detect the RMA? Are there any other important points I should know about?
Only if you plan to upgrade later, but compared to gen 4 it's significantly pricier; if you skip the upgrade, it doesn't matter. 3. Yes, according to the picture it should work. 4. It's better to purchase an expansion card with USB 2 headers like those in the PCI slots. 5. There should be a CPU voltage display in the overclocking area, not just for overclocking. 6. Check this video. 7. It should function. 8. No further questions needed.
Start here with PC gaming and building setups. To address your query, I’ll follow these steps: 1. Review the manual at the provided link. 2. Confirm if you need warranty support from Asus. 3. Acknowledge that they use different headers, though USB 3 supports backward compatibility. 4. Verify by reading the manual again. 5. Ensure the manual is available for download. 6. Confirm the manual is included. 7. Double-check by reading it once more. 8. Final confirmation.
Start by installing the operating system, then configure the BIOS files. Next, update the BIOS, return to Windows, install Intel ME, and finally update the drivers. The sequence isn't critical, but doing the OS first helps the system understand before changing BIOS settings.