F5F Stay Refreshed Hardware Desktop Asus ROG Strix x670e-e Green Boot with LED lighting, BIOS-free version

Asus ROG Strix x670e-e Green Boot with LED lighting, BIOS-free version

Asus ROG Strix x670e-e Green Boot with LED lighting, BIOS-free version

Pages (2): 1 2 Next
S
Sussu
Senior Member
708
05-26-2022, 03:25 PM
#1
Asus Rog Strix x670 green boot light is a recent addition to my setup. I’m still experiencing this green indicator. On the display, the ROG logo appears and the prompt says “Press Del to enter BIOS,” but pressing it doesn’t do anything. I’ve tried several fixes: reinstalling the GPU, cleaning the CPU, rearranging M.2 drives, checking RAM connections, reseating components one at a time, securing all cables, resetting CMOS, and even removing the CMOS for 30 seconds. Nothing seems to resolve the issue. I invested around $3600 in this build and it’s frustrating. Here are the details: case, CPU, cooler, motherboard, GPU, RAM, and storage specs as listed.
S
Sussu
05-26-2022, 03:25 PM #1

Asus Rog Strix x670 green boot light is a recent addition to my setup. I’m still experiencing this green indicator. On the display, the ROG logo appears and the prompt says “Press Del to enter BIOS,” but pressing it doesn’t do anything. I’ve tried several fixes: reinstalling the GPU, cleaning the CPU, rearranging M.2 drives, checking RAM connections, reseating components one at a time, securing all cables, resetting CMOS, and even removing the CMOS for 30 seconds. Nothing seems to resolve the issue. I invested around $3600 in this build and it’s frustrating. Here are the details: case, CPU, cooler, motherboard, GPU, RAM, and storage specs as listed.

A
alsdus7
Junior Member
15
05-27-2022, 10:16 AM
#2
The issue is clearly unresolved—posting about reseat CPUs and verifying the 8-pin connection isn't happening at all.
A
alsdus7
05-27-2022, 10:16 AM #2

The issue is clearly unresolved—posting about reseat CPUs and verifying the 8-pin connection isn't happening at all.

T
toejamdaddy
Member
135
06-17-2022, 12:24 PM
#3
Press and hold DEL until entering Bios is active; avoid releasing it afterward. For post tests, perform them outside the case using a rubber mat, PSU, MB, CPU, cooler, GPU (if necessary), RAM, monitor, and cables. No other steps required. Let me know your results from outside the case.
T
toejamdaddy
06-17-2022, 12:24 PM #3

Press and hold DEL until entering Bios is active; avoid releasing it afterward. For post tests, perform them outside the case using a rubber mat, PSU, MB, CPU, cooler, GPU (if necessary), RAM, monitor, and cables. No other steps required. Let me know your results from outside the case.

S
SuperTigresss
Posting Freak
768
06-20-2022, 10:19 PM
#4
On ASUS devices, seeing zero on CPU usually indicates it wasn't detected or installed properly. Re-seat the CPU and verify all eight pins are securely connected. Also inspect for any bent pins in the AM5 socket and consider removing the RAM stick from the A2 slot if needed.
S
SuperTigresss
06-20-2022, 10:19 PM #4

On ASUS devices, seeing zero on CPU usually indicates it wasn't detected or installed properly. Re-seat the CPU and verify all eight pins are securely connected. Also inspect for any bent pins in the AM5 socket and consider removing the RAM stick from the A2 slot if needed.

T
Titto27
Member
112
06-27-2022, 09:48 PM
#5
I’m having trouble accessing the BIOS settings. It stays on the ROG splash screen and doesn’t respond to delete or F2 commands. I also tried updating the BIOS, but that didn’t help. Additionally, I’m receiving a 00 Q-code, which usually indicates multiple issues.
T
Titto27
06-27-2022, 09:48 PM #5

I’m having trouble accessing the BIOS settings. It stays on the ROG splash screen and doesn’t respond to delete or F2 commands. I also tried updating the BIOS, but that didn’t help. Additionally, I’m receiving a 00 Q-code, which usually indicates multiple issues.

D
Dillon451
Junior Member
15
06-29-2022, 05:20 AM
#6
I’ve checked everything and the issue persists. The CPU appears to be functioning normally. No bent pins detected, thermal paste seems adequate, and the 8-pin connections are correctly placed on both sides. During testing, the CPU would occasionally power on and off, which might indicate it’s operating properly despite the intermittent behavior.
D
Dillon451
06-29-2022, 05:20 AM #6

I’ve checked everything and the issue persists. The CPU appears to be functioning normally. No bent pins detected, thermal paste seems adequate, and the 8-pin connections are correctly placed on both sides. During testing, the CPU would occasionally power on and off, which might indicate it’s operating properly despite the intermittent behavior.

C
Cornettt
Member
66
06-29-2022, 12:59 PM
#7
Attempted but encountered the same issue again.
C
Cornettt
06-29-2022, 12:59 PM #7

Attempted but encountered the same issue again.

P
PIXELBram
Junior Member
8
07-01-2022, 01:26 PM
#8
Set up your Windows USB installer properly. It's having trouble locating a boot device.
P
PIXELBram
07-01-2022, 01:26 PM #8

Set up your Windows USB installer properly. It's having trouble locating a boot device.

W
wilger_monster
Member
201
07-03-2022, 08:09 AM
#9
I also attempted it and didn’t get anything, but I’ll give it another shot tomorrow morning. Right now I’m really exhausted.
W
wilger_monster
07-03-2022, 08:09 AM #9

I also attempted it and didn’t get anything, but I’ll give it another shot tomorrow morning. Right now I’m really exhausted.

C
Classy_Mexican
Member
64
07-03-2022, 08:30 AM
#10
Thermal paste doesn't do anything with it not posting necessarily. If everything looks normal. Check the back of the MB to make sure you haven't managed to scratch anything. Or the CPU or mobo is potentially dead
C
Classy_Mexican
07-03-2022, 08:30 AM #10

Thermal paste doesn't do anything with it not posting necessarily. If everything looks normal. Check the back of the MB to make sure you haven't managed to scratch anything. Or the CPU or mobo is potentially dead

Pages (2): 1 2 Next