F5F Stay Refreshed Hardware Desktop Asus ROG Strix B360-F motherboard compatible.

Asus ROG Strix B360-F motherboard compatible.

Asus ROG Strix B360-F motherboard compatible.

X
XxPandaxX_74
Member
Find
179
08-23-2018, 04:57 PM
#1
Hi, I'm facing a problem with video output from the Asus ROG B360-F using its built-in graphics. The board powers on, LED lights are working, and fans are running. Another PSU works similarly but still doesn't display anything. I've connected an ASUS GTX 1060 GPU too, but no signal appears. I've checked RAM, reset CMOS, and there are no error lights. No power issues detected. I'm not sure if the board is faulty or if it's dead.
Reply
Reply
X
XxPandaxX_74
08-23-2018, 04:57 PM #1

Hi, I'm facing a problem with video output from the Asus ROG B360-F using its built-in graphics. The board powers on, LED lights are working, and fans are running. Another PSU works similarly but still doesn't display anything. I've connected an ASUS GTX 1060 GPU too, but no signal appears. I've checked RAM, reset CMOS, and there are no error lights. No power issues detected. I'm not sure if the board is faulty or if it's dead.

Reply
Reply
Y
ySkotBr_
Junior Member
Find
5
08-23-2018, 05:48 PM
#2
Hi, I'm facing a problem with video output from the Asus ROG B360-F using its built-in graphics. The board powers on, LEDs are lit, and visuals are working. Another PSU gives the same result. Fans spin, and I've connected an ASUS GTX 1060 GPU but no signal appears. I've reset RAM and CMOS, checked for fault codes, and confirmed all components are powered. No beep sounds when it starts. I don't have a comparable board for testing. Could you help figure this out?
Reply
Reply
Y
ySkotBr_
08-23-2018, 05:48 PM #2

Hi, I'm facing a problem with video output from the Asus ROG B360-F using its built-in graphics. The board powers on, LEDs are lit, and visuals are working. Another PSU gives the same result. Fans spin, and I've connected an ASUS GTX 1060 GPU but no signal appears. I've reset RAM and CMOS, checked for fault codes, and confirmed all components are powered. No beep sounds when it starts. I don't have a comparable board for testing. Could you help figure this out?

Reply
Reply