Assistance with boosting performance

Pages (2): 1 2 Next

205

04-17-2018, 07:49 AM

Attempting to push my setup to higher speeds was a new experience on my 2700x. Each restart would cause it to stall before Windows loaded or crash when it reached the OS, though the CPU would spike to 3.8GHz. The motherboard is an ASUS Strix B450-F with a Corsair H100i RAM stick and gaming cooling.

Salty_Cactus1

04-17-2018, 07:49 AM #1

wehhtam
Member

04-17-2018, 04:32 PM

Also tried reverting to base clock, everything functions properly.

wehhtam

04-17-2018, 04:32 PM #2

Also tried reverting to base clock, everything functions properly.

iWillex
Junior Member

04-18-2018, 01:03 AM

Check if the CPU is being pushed beyond its limits or if the RAM is struggling to keep up.

iWillex

04-18-2018, 01:03 AM #3

Check if the CPU is being pushed beyond its limits or if the RAM is struggling to keep up.

yoppy218
Member

180

04-18-2018, 01:36 AM

It looks like the process wasn't completed correctly. Please restart and begin fresh, but don’t hesitate to watch some guides if you’re unsure.

yoppy218

04-18-2018, 01:36 AM #4

It looks like the process wasn't completed correctly. Please restart and begin fresh, but don’t hesitate to watch some guides if you’re unsure.

CaptKrazy
Member

234

04-18-2018, 03:19 AM

Lower the overclock slightly, aiming for half the previous setting. Check if it functions. If successful, let it run for 20 minutes. If stable, proceed to increase gradually; if not, reduce again. Keep repeating until you discover the optimal setting for your CPU.

CaptKrazy

04-18-2018, 03:19 AM #5

X_pinkie_pie_Z
Member

04-22-2018, 06:49 PM

I'll let you know what occurs.

X_pinkie_pie_Z

04-22-2018, 06:49 PM #6

I'll let you know what occurs.

ThaBear
Member

224

05-14-2018, 01:44 AM

I’m planning to increase the clock speed gradually rather than jumping it this time.

ThaBear

05-14-2018, 01:44 AM #7

I’m planning to increase the clock speed gradually rather than jumping it this time.

berzi123
Junior Member

05-14-2018, 06:12 AM

Current voltage configurations are being tested. BSODs occurred during voltage adjustments without clock speed limits, causing crashes when CPU exceeded safe thresholds.

berzi123

05-14-2018, 06:12 AM #8

Current voltage configurations are being tested. BSODs occurred during voltage adjustments without clock speed limits, causing crashes when CPU exceeded safe thresholds.

xLag
Junior Member

05-14-2018, 07:27 AM

This indicates your overclock isn't reliable. Not every CPU can handle even a slight speed increase beyond its base performance.

xLag

05-14-2018, 07:27 AM #9

This indicates your overclock isn't reliable. Not every CPU can handle even a slight speed increase beyond its base performance.

Sk8_skater
Junior Member

05-20-2018, 06:56 PM

#10

You're testing a static overclock? (manual) Probably not as effective as the SenseMi overclocking on that board. At 4.0 to 4.1ghz manually, aim for a 1.410v core speed. Around 4.2ghz you'd target 1.450-1.4750v. (It draws more power, all cores and threads need more current.) At 4.3ghz you'd likely be in the 1.5-1.5250v range. That's what I've noticed from experience. If you need advice on fine-tuning SenseMi tech, I'm here to help.

Sk8_skater

05-20-2018, 06:56 PM #10

Pages (2): 1 2 Next