Assist the panel, where?

Pages (2): 1 2 Next

notcho44
Junior Member

12-11-2016, 01:50 AM

Review the manual carefully. The front panel connectors are likely to be power and restart buttons, possibly with a USB option.

notcho44

12-11-2016, 01:50 AM #1

Review the manual carefully. The front panel connectors are likely to be power and restart buttons, possibly with a USB option.

xMysticMew
Member

12-19-2016, 07:26 AM

The instructions don't mention anything about the mainboard or related issues.

xMysticMew

12-19-2016, 07:26 AM #2

The instructions don't mention anything about the mainboard or related issues.

Inviss
Junior Member

12-22-2016, 12:00 PM

A break-out adapter should include distinct cables for every individual header.

Inviss

12-22-2016, 12:00 PM #3

A break-out adapter should include distinct cables for every individual header.

Selini
Member

161

12-23-2016, 12:50 PM

The front panel connects via USB 2.0. The connectors are positioned just behind your hand. (Note this plug is keyed—only one orientation works.) Updated note: Narrator: Apparently, minibois made another mistake. This isn't actually USB 2.0.

Selini

12-23-2016, 12:50 PM #4

striderstroke
Junior Member

12-23-2016, 02:47 PM

Oh no, should I do this? Ugh.

striderstroke

12-23-2016, 02:47 PM #5

Oh no, should I do this? Ugh.

Bryceconner62
Member

12-25-2016, 03:08 PM

USB, but it's not USB—it's a f_panel

Bryceconner62

12-25-2016, 03:08 PM #6

USB, but it's not USB—it's a f_panel

Krenne464
Junior Member

12-25-2016, 03:21 PM

It's actually the front panel aggregate header. NZXT doesn't provide a breakout cable for it, and I couldn't find a compatible motherboard for that connector. Suggest reaching out to NZXT support—they might send you one.

Krenne464

12-25-2016, 03:21 PM #7

Darkeos
Senior Member

538

12-27-2016, 03:53 PM

It seemed very similar to a USB 2.0 front panel. The case should include a matching cable, and the connectors are located at the bottom right of the board.

Darkeos

12-27-2016, 03:53 PM #8

It seemed very similar to a USB 2.0 front panel. The case should include a matching cable, and the connectors are located at the bottom right of the board.

RadicalTitan
Member

12-27-2016, 11:12 PM

It seems the manual mentioned it should be included, but I haven’t confirmed. From my experience, when I built a PC with an NZXT, I managed to connect those separate wires myself. I don’t recall using an adapter cable, though I’m not sure if I ever did.

RadicalTitan

12-27-2016, 11:12 PM #9

_ShadoWn25_
Junior Member

01-01-2017, 10:49 AM

#10

Could depend on updated versions or the NXT H510. Only the person in charge is certain.

_ShadoWn25_

01-01-2017, 10:49 AM #10

Could depend on updated versions or the NXT H510. Only the person in charge is certain.

Pages (2): 1 2 Next