F5F Stay Refreshed Hardware Desktop Asrock motherboard with aura synchronization features

Asrock motherboard with aura synchronization features

Asrock motherboard with aura synchronization features

D
Dingdongyou
Member
220
03-26-2022, 03:58 AM
#1
You're looking into ways to make your Asrock B450M Pro F work with either AuraSync or ASRock RGB. It's possible you need a compatible adapter or driver, as the fans use a 3-pin ARGB interface which isn't standard for most RGB controllers. Checking the manufacturer's documentation or forums might help clarify the setup. If not working, upgrading the motherboard could be a better long-term solution.
D
Dingdongyou
03-26-2022, 03:58 AM #1

You're looking into ways to make your Asrock B450M Pro F work with either AuraSync or ASRock RGB. It's possible you need a compatible adapter or driver, as the fans use a 3-pin ARGB interface which isn't standard for most RGB controllers. Checking the manufacturer's documentation or forums might help clarify the setup. If not working, upgrading the motherboard could be a better long-term solution.

G
gogofrgl1234
Senior Member
718
03-26-2022, 07:26 AM
#2
Check if the fan LEDs are connected to the right port and facing the right direction using the Asrock software.
G
gogofrgl1234
03-26-2022, 07:26 AM #2

Check if the fan LEDs are connected to the right port and facing the right direction using the Asrock software.

J
JayGaming
Junior Member
29
03-30-2022, 04:24 PM
#3
As HairlessMonkeyBoy discussed, did you connect to the right motherboard header? The method involves linking your fan to the DarkFlash controller, then using the port labeled MB Sync on that controller. You'll need to attach the provided argb cable from that port to your motherboard's argb header. After setting it up, open the ASRock Polychrome Sync app, turn on the argb header, pick a color first, and finally configure the mode on the DarkFlash controller to match the color you set in the application.
J
JayGaming
03-30-2022, 04:24 PM #3

As HairlessMonkeyBoy discussed, did you connect to the right motherboard header? The method involves linking your fan to the DarkFlash controller, then using the port labeled MB Sync on that controller. You'll need to attach the provided argb cable from that port to your motherboard's argb header. After setting it up, open the ASRock Polychrome Sync app, turn on the argb header, pick a color first, and finally configure the mode on the DarkFlash controller to match the color you set in the application.