F5F Stay Refreshed Hardware Desktop ASRock B650I Lightning Wi-Fi with XMP settings leading to memory crashes and errors

ASRock B650I Lightning Wi-Fi with XMP settings leading to memory crashes and errors

ASRock B650I Lightning Wi-Fi with XMP settings leading to memory crashes and errors

Pages (2): 1 2 Next
L
littlemoosedog
Junior Member
25
05-05-2021, 01:14 AM
#1
I own a collection of memory I purchased. Whenever I enable XMP, I struggle to complete more than one minute in an OCCT benchmark or stress test without running into memory issues or a BSOD. This never happened with the earlier memory type. I reset the BIOS, applied just XMP and left all other settings untouched. I updated Windows, BIOS, graphics drivers, and ran a memory diagnostic—still no clear answer. The specific memory in question is: https://www.amazon.com/Patriot-Viper-Ven...1_1?sr=8-1 My previous set of memory: https://www.amazon.com/TEAMGROUP-T-Force...1_6?sr=8-6
L
littlemoosedog
05-05-2021, 01:14 AM #1

I own a collection of memory I purchased. Whenever I enable XMP, I struggle to complete more than one minute in an OCCT benchmark or stress test without running into memory issues or a BSOD. This never happened with the earlier memory type. I reset the BIOS, applied just XMP and left all other settings untouched. I updated Windows, BIOS, graphics drivers, and ran a memory diagnostic—still no clear answer. The specific memory in question is: https://www.amazon.com/Patriot-Viper-Ven...1_1?sr=8-1 My previous set of memory: https://www.amazon.com/TEAMGROUP-T-Force...1_6?sr=8-6

N
Niclin13
Member
193
05-07-2021, 01:45 PM
#2
What processor do you have? The more above 6000Mhz you are, the less stable your RAM tends to be. Your RAM is 7000Mhz with XMP enabled.
N
Niclin13
05-07-2021, 01:45 PM #2

What processor do you have? The more above 6000Mhz you are, the less stable your RAM tends to be. Your RAM is 7000Mhz with XMP enabled.

W
wiggo2007
Junior Member
7
05-07-2021, 06:07 PM
#3
Hey there, I share the same motherboard and my Patriot RAM, though it runs a bit slower. This particular memory isn't listed on the ASRocks QVL, but a very close match is available and it's rated for 7000. It might be a BIOS problem (you'd need an updated BIOS to test) or an issue with the hardware itself. If you're still within the return period, I’d suggest returning the item—either get something from the QVL or try a replacement. It’s better than risking a newer BIOS fix.
W
wiggo2007
05-07-2021, 06:07 PM #3

Hey there, I share the same motherboard and my Patriot RAM, though it runs a bit slower. This particular memory isn't listed on the ASRocks QVL, but a very close match is available and it's rated for 7000. It might be a BIOS problem (you'd need an updated BIOS to test) or an issue with the hardware itself. If you're still within the return period, I’d suggest returning the item—either get something from the QVL or try a replacement. It’s better than risking a newer BIOS fix.

M
mmillaa
Member
197
05-27-2021, 12:09 AM
#4
The voltage is 7000Mt/s on XMP while using a Ryzen 7 7800x3d processor.
M
mmillaa
05-27-2021, 12:09 AM #4

The voltage is 7000Mt/s on XMP while using a Ryzen 7 7800x3d processor.

H
HiImAnnabel
Member
238
05-27-2021, 05:19 PM
#5
It includes three predefined XMP profiles for different speeds, but all are unstable. The only reliable method was adjusting just the frequency in BIOS and Task Manager, which shows 7000, and it doesn’t crash—just feels like you’re missing something from your RAM.
H
HiImAnnabel
05-27-2021, 05:19 PM #5

It includes three predefined XMP profiles for different speeds, but all are unstable. The only reliable method was adjusting just the frequency in BIOS and Task Manager, which shows 7000, and it doesn’t crash—just feels like you’re missing something from your RAM.

E
Ezreal_V
Junior Member
46
05-27-2021, 07:07 PM
#6
It seems like you're hinting at a specific moment or feeling. Could you clarify what you mean? I'm here to help with any questions or discussions you have!
E
Ezreal_V
05-27-2021, 07:07 PM #6

It seems like you're hinting at a specific moment or feeling. Could you clarify what you mean? I'm here to help with any questions or discussions you have!

B
BugBoy82
Junior Member
20
05-29-2021, 04:27 PM
#7
I would check a RAM optimization guide. DDR5 tends to perform best at around 6000MHz. Even if reaching 7000MHz isn't possible, you might still achieve stable speeds at 6000MHz or lower. Speeds above that usually require adjustments like tweaking timings. Running at 6400MHz can be done out of the box in some cases, while others get close without major changes but with trade-offs. The 7000 series is a new generation using DDR5, so compatibility isn't assured, especially at unsupported rates. For AM5 Ryzen models, the sweet spot is around 6000MHz, which is just above what most RAM supports. Higher speeds generally need fine tuning or come with limitations.
B
BugBoy82
05-29-2021, 04:27 PM #7

I would check a RAM optimization guide. DDR5 tends to perform best at around 6000MHz. Even if reaching 7000MHz isn't possible, you might still achieve stable speeds at 6000MHz or lower. Speeds above that usually require adjustments like tweaking timings. Running at 6400MHz can be done out of the box in some cases, while others get close without major changes but with trade-offs. The 7000 series is a new generation using DDR5, so compatibility isn't assured, especially at unsupported rates. For AM5 Ryzen models, the sweet spot is around 6000MHz, which is just above what most RAM supports. Higher speeds generally need fine tuning or come with limitations.

S
SgmfranKo
Junior Member
5
05-29-2021, 06:23 PM
#8
Consider using slower RAM with more precise timing, such as 6000MT CL30 latency. You might also find RAM that already has optimized timing settings, or you can adjust the timing manually on less precise sticks if needed.
S
SgmfranKo
05-29-2021, 06:23 PM #8

Consider using slower RAM with more precise timing, such as 6000MT CL30 latency. You might also find RAM that already has optimized timing settings, or you can adjust the timing manually on less precise sticks if needed.

T
thingul
Member
136
05-31-2021, 06:15 PM
#9
Unfortunately I'm just past the return period.
T
thingul
05-31-2021, 06:15 PM #9

Unfortunately I'm just past the return period.

R
RocketMan109
Junior Member
44
05-31-2021, 08:27 PM
#10
It’s a bit disappointing since I was expecting everything to work smoothly. I realized I missed enabling XMP, which triggered a BSOD and other issues. Now I’m going to replace the remaining components.
R
RocketMan109
05-31-2021, 08:27 PM #10

It’s a bit disappointing since I was expecting everything to work smoothly. I realized I missed enabling XMP, which triggered a BSOD and other issues. Now I’m going to replace the remaining components.

Pages (2): 1 2 Next