Are you sure you didn't use too much thermal paste? Checking videos shows others apply much less.
Are you sure you didn't use too much thermal paste? Checking videos shows others apply much less.
So long as the cpu has mounting pressure, there is no pressure to push thermal paste into areas that will cause a pin to loose connection with the pad as the paste will sooner ooze out of the sides of the socket rather than in between. Like I said, conductive paste is a different story.
Excess thermal compound isn't harmful to performance, but it's not ideal—especially with premium products. You only need a third of your current amount, but avoid letting it seep into the board or socket. When applying the paste and installing the cooler, act quickly and carefully; don’t let it sit unnecessarily. There’s a risk of dust, hair, or particles getting trapped on the chip, which can affect results. For best results, ensure both surfaces are clean beforehand and seal everything securely and promptly.
Getting it back in the tube is almost unfeasible. The device has already been used. There’s little value. Additionally, the materials won’t cause any damage. It’s non-conductive and water-resistant. The main concern comes during cleanup before installing a new mount.
It seems the response hinges on uncertainty. The outcome might be possible, but it’s not a major concern.
The temperature settings recommend using the smallest possible amount. I think there’s a balance to find—just like there’s a limit to avoid excess. That’s why many people express frustration over overheating. As Steve mentioned, there’s no point in having too much, so you should heed that advice.
Above a certain limit it just pushes outward from the sides, and that limit works for my needs. Not the best, but acceptable. The thinner it gets, the more chance there is of missing coverage, which is worse. So you end up using a lot, or you hope it works.