Are there flickering blue images during the setup of a new Windows 11 version?
Are there flickering blue images during the setup of a new Windows 11 version?
Hi everyone, I just put in Windows 11 today and everything looked okay at first, but I’m now encountering a lot of blue screen issues.
I added a 2TB WD Blue SN5000 M.2 SSD, which is a new part in the system. I assumed it might be overheating, but temperatures seem normal.
Here’s what happened: I installed Windows 11 from USB and everything proceeded smoothly. While downloading programs or logging in, Firefox would freeze, then restart after about 30 seconds.
I checked Event Viewer and discovered an error—Secure Boot wasn’t enabled. The System Information also confirmed Secure Boot was off, and the BIOS was set to UEFI mode. I had believed it was still running Windows 10, which is why I proceeded with the upgrade.
Later, I switched the BIOS to UEFI mode and re-enabled Secure Boot. It took a few restarts, and occasionally I saw this distorted blue screen, which would appear briefly before I restarted again.
Eventually, I was able to return to Windows normally, but whenever I tried a restart just to test, the issue repeated. Sometimes it appeared at the login screen, other times I could log in but then it would happen moments after the desktop loaded.
I ended up shutting down the system when I reached the lock screen and turned it back on about ten minutes later. Everything worked fine afterward, but I’m still puzzled by what’s going on.
Anyone have any advice or insights?
Specs
MBD: MSI B350M Bazooka
CPU: Ryzen 5 3600
GPU: RX 6700 10GB
RAM: 16 GB DDR4
PSU: EVGA 650w G2
Storage
2TB M.2 NVMe SSD (new drive)
2TB HDD
4TB HDD
Here’s a version of your text with similar structure but different phrasing:
Could you provide an image of the Disk Management interface?
What BIOS version is installed on your motherboard? I recommend preparing a bootable USB for Windows 11, deleting all drives except the one you plan to install, then formatting and reinstalling the OS offline. After confirming Secure Boot and fTPM are enabled in BIOS, you may need to update the BIOS to the latest version.
After a successful installation, install all necessary drivers using the most recent versions. You’ll need to download them beforehand and have them on a removable drive, such as right-clicking the installer and selecting Run as Administrator.
EVGA 650w G2
Is this your device?
EVGA SuperNOVA 650 G2 Review
EVGA has recently introduced models with 550 W and 650 W capacities in their SuperNOVA G2 series. Today, we’ll examine the 650 G2 in detail, highlighting its strong performance and quiet operation—features that appeal to many users.
www.techpowerup.com
What is its age?
Hello there, thank you for your response. I've been struggling to get back into Windows for about 40 minutes, which is quite frustrating.
https://imgur.com/a/spheBBF
I'm hoping the link you shared will capture a screenshot of Disk Management.
At first, I removed my drives when installing Windows 11 on an nvme drive. After completing all updates and the system seemed idle, I shut it down and then reconnected everything. The first restart took around an hour.
When I installed Windows 11, fTPM was turned on but Secure Boot was disabled. Now that it's enabled, could this have played a role in the problem?
Also, my BIOS is from 2019. I remember updating it to ensure compatibility with the Ryzen 5 3600 on my motherboard. Earlier, I had a Ryzen 5 1400.
Regarding the power supply unit, yes, that appears to be my model. I checked Amazon and bought it back in September 2018.
The issue is that throughout my Windows 10 experience, the system remained stable. I recall having a blue screen about a week after installing my current CPU. Since then, everything has been fine until now.
I think updating the BIOS and trying the installation again might help. It's just so frustrating. My files are backed up regularly, so I'm not too concerned there, but the instability of my PC is really annoying. I'm considering reverting to Windows 10 with my SATA 3 drive for now.
https://imgur.com/8ru6E9j
Just if it mattered, this is the BSOD I consistently get, looks like it says Critical Process Died.
The issue is usually caused by a hardware fault. After installing the M.2 drive, try taking it out and reinserting it securely. Also consider removing and reattaching the RAM. Make sure all connectors are fully inserted at both ends. The most probable reason is that something was moved inside while installing the new drive. I don’t understand what a 'distorted' blue screen appears as, but could you please download the SysnativeBSODCollectionApp and save it to your Desktop? Then run it and upload the resulting zip file to a cloud service with a link. This tool gathers all troubleshooting information we might need. It doesn’t collect any personal data. It’s used by many trusted Windows help forums, including this one. I’m a senior BSOD analyst on the Sysnative forum where this tool originated, so I’m confident it’s safe. You can also review the contents of the zip file before uploading, as most files are text documents. Please avoid modifying or deleting anything. For a description of each file, you’ll find it here.
Hi all, I appreciate the responses. Here's what I've done so far.
By distorted blue screen, I mean it's like 3 bsod's that sort of overlap each other, but I could make out of words critical process died. I think the screenshot I linked in the above post should let you know what I meant by that. I have yet to have a solid regular bsod.
I unplugged the 2 hdd's with the intention of reinstalling windows. I reseated the RAM, GPU (m.2 slot is under GPU), and the nvme drive.
I updated the BIOS to the latest version, and after I did that, I saw that fTPM was still enabled, but Secure Boot was not anymore, so I enabled that.
After doing that, I got to the Bit Locker Recovery screen, I think because I changed the secure boot setting. After entering the recovery code, I got to the lock screen and Windows said that my PIN was no longer valid, and to click on that message to set a new one. Naturally, I was unable to set up a pin, and the message just keep reappearing to click to set up a new pin.
So where I currently am, is that I can't get to my desktop, and still have that cycle of getting to lock screen, being able to use mouse and keyboard for 10 seconds or so, seeing the bsod, and a restart.
I'm waiting for my laptop to finish making a new installation media, so that'll be my next step.
I appreciate your responses, I'll update later on.
I recommend taking out the BitLocker encryption.
Also turn off secure boot.
Ensure you have the chipset drivers installed and reinstall the graphics card drivers.
Links provided:
https://www.msi.com/Motherboard/B350M-BA...ort#driver
https://www.amd.com/en/support/down...ra...-6700.html
During my first setup, I was completely unaware of bit locker. I must have heard about it, but didn't realize it would make such a difference. I assumed Secure Boot had to be turned on for Windows 11, right? After a few updates and a restart, I encountered a blue screen with the message "Inaccessible Boot Device." This was unfamiliar to me. I had an appointment and left it there. I'm really confused—I've never faced such issues with Windows before. I'm considering going back to my old BIOS and replacing the NVMe drive.
I believe you set up the newest Win11 ISO file without including the remaining hard drives you possess.
It's probable that the drive letter assignments have been rearranged. To correct this, you should boot from a USB image and execute a bootrec repair. Refer to the instructions here: https://www.diskpart.com/windows-10/fix-...-0708.html. For guidance, follow the steps provided.