F5F Stay Refreshed Hardware Desktop Appearance during BIOS setup after an update is unusual and may indicate a system issue.

Appearance during BIOS setup after an update is unusual and may indicate a system issue.

Appearance during BIOS setup after an update is unusual and may indicate a system issue.

Pages (2): 1 2 Next
A
AJplazMC10
Junior Member
28
02-19-2022, 09:32 PM
#1
The update now includes the Intel 0x129 Microcode fix. After rebooting, open BIOS and set your XMP settings as usual. For your Deepcool LS720, look for the XMP configuration section during setup. If you need further help, let me know!
A
AJplazMC10
02-19-2022, 09:32 PM #1

The update now includes the Intel 0x129 Microcode fix. After rebooting, open BIOS and set your XMP settings as usual. For your Deepcool LS720, look for the XMP configuration section during setup. If you need further help, let me know!

T
TheAmericanGuy
Member
69
02-19-2022, 10:41 PM
#2
Checking the Make and Model of your motherboard in the photo can provide useful details.
T
TheAmericanGuy
02-19-2022, 10:41 PM #2

Checking the Make and Model of your motherboard in the photo can provide useful details.

W
WildCandy
Senior Member
675
02-20-2022, 01:13 AM
#3
Opt for the standard setting and assess the results. You can adjust it later via OC options, as outlined in the MSI blog. This update relates to the new Intel performance configuration, not a specific board model.
W
WildCandy
02-20-2022, 01:13 AM #3

Opt for the standard setting and assess the results. You can adjust it later via OC options, as outlined in the MSI blog. This update relates to the new Intel performance configuration, not a specific board model.

D
DJrg82
Member
78
02-21-2022, 06:19 AM
#4
This generation comes before the 13th and 14th updates, and I’ve switched back to Intel defaults for better stability.
D
DJrg82
02-21-2022, 06:19 AM #4

This generation comes before the 13th and 14th updates, and I’ve switched back to Intel defaults for better stability.

D
djninja444
Member
173
02-25-2022, 09:19 AM
#5
The full specifications are listed in the short description below your posts. After selecting the default, you discovered the relevant section is within Over Clocking, which isn’t something I use. This likely doesn’t affect my needs.
D
djninja444
02-25-2022, 09:19 AM #5

The full specifications are listed in the short description below your posts. After selecting the default, you discovered the relevant section is within Over Clocking, which isn’t something I use. This likely doesn’t affect my needs.

T
techiseasy
Senior Member
688
02-25-2022, 10:55 AM
#6
The safe voltage range is limited to Intel default configurations, regardless of the updated microcode.
T
techiseasy
02-25-2022, 10:55 AM #6

The safe voltage range is limited to Intel default configurations, regardless of the updated microcode.

P
ProGaben69
Member
117
02-25-2022, 08:33 PM
#7
It's interesting that my voltage readings haven't changed after the microcode update.
P
ProGaben69
02-25-2022, 08:33 PM #7

It's interesting that my voltage readings haven't changed after the microcode update.

D
darknesshitsme
Junior Member
15
02-25-2022, 10:13 PM
#8
D
darknesshitsme
02-25-2022, 10:13 PM #8

S
StopBrosYT
Member
53
03-02-2022, 02:30 PM
#9
It seems best to locate it within the hardware monitoring section of the BIOS, especially when choosing fan profiles. The presence of "Hardware Monitor" in your image confirms you're in that area. Pressing F7 will reveal advanced menus and may make it accessible under Hardware Monitor if not visible in E-Z mode. Based on your cooling setup, default or performance settings should suffice; however, avoid using unlimited options.
S
StopBrosYT
03-02-2022, 02:30 PM #9

It seems best to locate it within the hardware monitoring section of the BIOS, especially when choosing fan profiles. The presence of "Hardware Monitor" in your image confirms you're in that area. Pressing F7 will reveal advanced menus and may make it accessible under Hardware Monitor if not visible in E-Z mode. Based on your cooling setup, default or performance settings should suffice; however, avoid using unlimited options.

T
tomtom60600
Junior Member
5
03-04-2022, 12:54 PM
#10
It was the display you saw immediately after starting the BIOS in easy mode. It appeared before I had a chance to interact with it.
T
tomtom60600
03-04-2022, 12:54 PM #10

It was the display you saw immediately after starting the BIOS in easy mode. It appeared before I had a chance to interact with it.

Pages (2): 1 2 Next