F5F Stay Refreshed Hardware Desktop Aorus Z690 Elite DDR4 CPU with red light debugging features

Aorus Z690 Elite DDR4 CPU with red light debugging features

Aorus Z690 Elite DDR4 CPU with red light debugging features

I
IngoGaming
Member
59
09-03-2022, 09:37 PM
#1
Hello, I understand you're facing some issues with your new PC setup. On your Aorus Z690 Elite DDR4 board, the CPU LED is displaying a persistent solid red light. After updating the BIOS via QFlashPlus to the latest version, the problem persists—newly purchased hardware arrived damaged, so the old board had to be returned. While technically it should be fine, something seems amiss. I'm seeking advice from others who might have encountered similar problems. Any suggestions or tips would be greatly appreciated. Also, note that after turning on the power, the RAM and case LEDs light up, but the CPU cooling LEDs remain off despite being connected, and the fans don't spin. The cooling unit itself appears to be functioning. I'm hoping this isn't due to a faulty CPU, as that would make it unsustainable with two damaged parts already installed. Your full configuration includes: i7-13700K, Aorus Z690 Elite DDR4, GSKill Trident Neo DDR4 2x8GB at 4000Mhz CL16, Bequiet Pure Power 1kW, CPU cooling from Alphacool Aisbaer Aurora 360, and a Sapphire RX6800 GPU. Please let me know if you have any insights.
I
IngoGaming
09-03-2022, 09:37 PM #1

Hello, I understand you're facing some issues with your new PC setup. On your Aorus Z690 Elite DDR4 board, the CPU LED is displaying a persistent solid red light. After updating the BIOS via QFlashPlus to the latest version, the problem persists—newly purchased hardware arrived damaged, so the old board had to be returned. While technically it should be fine, something seems amiss. I'm seeking advice from others who might have encountered similar problems. Any suggestions or tips would be greatly appreciated. Also, note that after turning on the power, the RAM and case LEDs light up, but the CPU cooling LEDs remain off despite being connected, and the fans don't spin. The cooling unit itself appears to be functioning. I'm hoping this isn't due to a faulty CPU, as that would make it unsustainable with two damaged parts already installed. Your full configuration includes: i7-13700K, Aorus Z690 Elite DDR4, GSKill Trident Neo DDR4 2x8GB at 4000Mhz CL16, Bequiet Pure Power 1kW, CPU cooling from Alphacool Aisbaer Aurora 360, and a Sapphire RX6800 GPU. Please let me know if you have any insights.

I
ItzMaark
Member
110
09-03-2022, 11:13 PM
#2
Consider skipping the Corsair H150i in favor of a more reliable option. 1) Perform a CMOS reset and remove the battery to clear any issues. 2) Reapply thermal paste and ensure you take off the plastic label from the cooler head.
I
ItzMaark
09-03-2022, 11:13 PM #2

Consider skipping the Corsair H150i in favor of a more reliable option. 1) Perform a CMOS reset and remove the battery to clear any issues. 2) Reapply thermal paste and ensure you take off the plastic label from the cooler head.

X
xxxLazersxxx
Member
117
09-22-2022, 01:45 PM
#3
It seems your new PC is having a hardware problem. The burning red LED on the CPU suggests a fault with the processor, possibly indicating a defective unit. To fix this, check that the CPU is firmly placed in its socket on the motherboard. Even if installed correctly, movement can loosen it. Inspect the CPU cooler for proper attachment and good contact with the CPU; poor cooling can lead to overheating. Re-seat the RAM modules to ensure they’re correctly installed. If you have a spare CPU, swap it in to see if the issue continues. This helps identify whether the problem lies with the CPU or another part. If these steps don’t resolve the issue, reach out to the manufacturer for more guidance. They can offer further troubleshooting or confirm component faults. Let me know if you need more help!
X
xxxLazersxxx
09-22-2022, 01:45 PM #3

It seems your new PC is having a hardware problem. The burning red LED on the CPU suggests a fault with the processor, possibly indicating a defective unit. To fix this, check that the CPU is firmly placed in its socket on the motherboard. Even if installed correctly, movement can loosen it. Inspect the CPU cooler for proper attachment and good contact with the CPU; poor cooling can lead to overheating. Re-seat the RAM modules to ensure they’re correctly installed. If you have a spare CPU, swap it in to see if the issue continues. This helps identify whether the problem lies with the CPU or another part. If these steps don’t resolve the issue, reach out to the manufacturer for more guidance. They can offer further troubleshooting or confirm component faults. Let me know if you need more help!