F5F Stay Refreshed Hardware Desktop Analyze the problem following the PSU replacement.

Analyze the problem following the PSU replacement.

Analyze the problem following the PSU replacement.

W
Wither01
Member
201
01-23-2022, 07:56 PM
#1
Hello, I noticed my power in the flat was working when I tripped, but after turning it back on, the PC wouldn't boot up—no lights, no fans, nothing at all. I thought it might be a PSU problem; I tested another PSU and it worked, though I didn’t have it on a screen. When I bought a new PSU and installed it, it started up and I could log in to TeamViewer, seeing the desktop. However, I’m still getting zero output from the GPU or onboard graphics. This morning I tried using the onboard graphics again, but got a very blurry image through the HDMI onboard display (GPU is currently disabled). I also experienced an issue when I refitted the PSU—remembering that the 24-pin wasn’t connected didn’t help, and I couldn’t power it on. I even tried using a spare GPU, but it still didn’t work. Thanks for your help!
W
Wither01
01-23-2022, 07:56 PM #1

Hello, I noticed my power in the flat was working when I tripped, but after turning it back on, the PC wouldn't boot up—no lights, no fans, nothing at all. I thought it might be a PSU problem; I tested another PSU and it worked, though I didn’t have it on a screen. When I bought a new PSU and installed it, it started up and I could log in to TeamViewer, seeing the desktop. However, I’m still getting zero output from the GPU or onboard graphics. This morning I tried using the onboard graphics again, but got a very blurry image through the HDMI onboard display (GPU is currently disabled). I also experienced an issue when I refitted the PSU—remembering that the 24-pin wasn’t connected didn’t help, and I couldn’t power it on. I even tried using a spare GPU, but it still didn’t work. Thanks for your help!