AMD protective plate.
AMD protective plate.
Budget (including currency): Already built Country: Ireland Games, programs or workloads that it will be used for: Gaming Other details This is a silly one, I've installed a new CPU AIO in my sons PC. I replaced the AIO with the MB in the case and due to difficulties with the AMD backplate I reversed the white sticker on the plate to hold it in place while I screwed it in. Would having the sticker stuck on the MB be an issue? I assume its OK as there is no heat generated on the back of the MB but I'm questioning this decision.
If the adhesive reaches a high enough temperature, it can ignite and burn.
I also want to note this point. Heat isn't produced directly at the back of the motherboard; instead, parts rely on it as a kind of cooling surface, which can cause those spots to become warm. Still, it shouldn't affect the adhesive. In the extreme case, it might burn (unlikely) and you'd need to remove it later, or it could complicate taking off the backplate. I should be careful not to add anything extra that wasn’t originally intended. Ensure the material can handle the heat from the components on the opposite side. MOSFETs, for example, dissipate a lot of heat into the board, and graphics memory chips use a flip-chip layout, placing the chip directly on the board near the physical surface.
The term might have been misused; "baked" seems more appropriate. It's not a big deal if it's baked on the backplate (after all, that's often overlooked). However, having someone on the back of the board could be less ideal, though it's not a major concern. What I aimed to convey was simply in a more concise way.