AMD FX-8350 experiences heat issues with CoolerMaster 212 EVO cooling solution.
AMD FX-8350 experiences heat issues with CoolerMaster 212 EVO cooling solution.
I understand I own an older computer and I’m considering an upgrade when prices drop a bit. My system was built in late 2015, so it seemed fine back then. However, since I purchased it, it’s always been a bit warm, especially during intense gaming sessions with a CoolerMaster 212 EVO cooler. I found out that the FX-8350 tends to run hot, which is typical, but with newer Intel and AMD CPUs it feels unusual to see such high temperatures even with a solid cooler. I don’t have an overclock, just four case fans providing positive airflow and a well-ventilated room. I’m trying to determine if my setup is normal or needs improvement, and whether there’s a simple solution before spending more.
It's typical for bulldozer CPUs to operate at that temperature. Actual temps vary by CPU generation—early AM4 Ryzen models run cooler compared to later 5000 series. AM5 Ryzen usually stays between 90-100°C, bringing us back to the bulldozer generation.
Alright, thanks for the reply. The best approach seems to be taking a little more time now.
It seems the details for the FX-8350 are limited to the Black Edition specifications, showing a maximum temperature of 61°C. You might be missing other models or features not covered in this information.
Typical case (ihs) peak temp stays below CPU die max, and I believe most CPUs begin throttling around 100°C.
Maybe the distinction is usually shown in parentheses, which isn't present here. What stands out is that 8350 is labeled Piledriver and 8320 as Bulldozer, both referencing 61C. I can see a 30°C gap between Die and TJunc, which aligns with the 90°C estimate mentioned. It's odd that this detail isn't included in the sources I'm checking. Edited October 16, 2022 by An0maly_76 Revised
You replaced the thermal paste on your CPU last. The case isn't ideal for airflow, but the Hyper 212 should work well with it.