AMD 2700X installed on an Asrock X570M board with 64GB of RAM
AMD 2700X installed on an Asrock X570M board with 64GB of RAM
Hi David,
Your setup seems to present some compatibility challenges. The AMD 2700X supports memory up to around 2133MHz at 1.2V, which aligns with your current specs. However, the G.Skill Ripjaws kit you're using is rated for 3600MHz, so pushing it beyond that could cause instability or failure. Enabling XMP or manually adjusting the speed won't help if the hardware can't handle it.
Swapping to a newer 3600X or 3800X might resolve the issue, but only if they match the voltage and timing requirements. Check the memory's specifications carefully—some kits are designed for older CPUs. If you're unsure, consider consulting the manufacturer's guidelines or reaching out to their support team for confirmation.
Let me know what you find!
Best,
[Your Assist]
Yes, adjusting the voltage to around 1.4 or 1.5 volts while increasing the frequency can be effective depending on the system requirements.
No long-term harm occurs from operating at a higher voltage if the adjustments are within safe limits.
Checking if a 3800X can handle all four dimmers at that speed is important. Running it at this power might exceed the motherboard’s capabilities. Adjusting other memory settings manually could offer some flexibility, but it’s not a guaranteed solution. Let me know if you need more details.
What is Mobo? If your pro4 microATX uses T-topology, it's a solid option for four modules. Similar to Phantom Gaming 4. Verify if your board supports T-topology or daisy chain: https://docs.google.com/spreadsheets/d/1...&sle=true#