AM5 motherboard with Intel XMP RAM support.
AM5 motherboard with Intel XMP RAM support.
Hey there, hope everyone is well. Over the past week I've been considering upgrading from the Intel 13700K to a Ryzen 7800X3D. I can swap out the motherboard and CPU to a microcenter model because I've faced issues like crashes or random shutdowns after changing the CPU retention bracket to ThermalRight for better cooling. I don’t want to alter my RAM setup (I like it as is). I have 64GB of G Skill Trident Z 6400MT/s, which can reach up to 7000MHz, but the box says Intel XMP. I remember AMD used XPM before and it didn’t matter which RAM was used across platforms, as long as it was DDR4 or DDR3. However, with DDR5, AMD introduced an Expo configuration that didn’t work well when AM5 first launched—I had a 7900X before switching to Intel 13700K. My main question is: can I keep my current RAM, or should I go back to microcenter for a replacement? I’m open to trying things out but don’t have much time to juggle between suppliers this weekend. Thanks in advance!
In most situations, XMP RAM functions properly even on AMD systems; recently, AMD introduced their own overclocking brand EXPO, though it isn’t as common as Intel’s solutions. When using an AM5 platform, you can still rely on XMP for RAM that supports up to 6000MT/s and there are no major problems. If you want certainty, try enabling XMP after upgrading your CPU and motherboard to AM5 and check the BIOS settings. Please confirm your AM5 board can handle speeds beyond 7000MT/s as listed on their site.
Thank you for your prompt response. The Asus ROG Strix x670 confirms compatibility with up to 8000MT/s RAM.
No issue. Extra tips: ASUS uses its own name for overclocking RAM called DOCP instead of XMP or EXPO. It’s just the same concept, but they rebrand it to stand out. Be prepared you might not find XMP settings on some ASUS motherboards.
This means experiencing frequent issues such as daily crashes or unexpected shutdowns caused by physical damage, like a scratch on the computer.
It seems like you're describing a situation where a scratch led to a shutdown of the computer. That doesn't make much sense—shouldn't a scratch cause damage rather than power off? Also, your sentences are really long and hard to follow. Can you rephrase it in simpler terms?
You're using a G.Skill Trident Z5 RGB on your X670E Carbon WiFi with a 7950X3D chipset running at 6400MT/s. It's equipped with a 2x16GB RAM configuration.
Hey, it's really helpful seeing others with similar memories—it gives you confidence. Did you apply the XMP profile on the MOBO, or did you need to tweak the timing and frequency yourself to make it work? Also, did you attempt to boost the speed to at least 6600 or 6800MT/s?
Two people from a group of three got it clear, even though you were stuck explaining the reasons for returning the MOBO and CPU. Appreciate your feedback.