AIO producing sounds at more than 90% capacity usage

Pages (2): 1 2 Next

197

11-15-2016, 05:34 PM

It seems your AIO produces unusual sounds mainly when operating at over 90% capacity. Should I consider replacing the pump or just adjusting its tension? The audio file is available as "AIO noises.m4a".

Lovechurros

11-15-2016, 05:34 PM #1

The_Redstreak
Member

11-19-2016, 10:53 AM

Sorry, we are going to need to know what the noises sound like. Can you get a recording if you can't describe it?

The_Redstreak

11-19-2016, 10:53 AM #2

Sorry, we are going to need to know what the noises sound like. Can you get a recording if you can't describe it?

cRz_GAMER
Junior Member

11-25-2016, 09:18 AM

It sounds like you're wondering if the noise you hear during heavy use is typical or if it raises concerns. Without a recording, it's hard to say for sure, but let's consider what might be happening.

cRz_GAMER

11-25-2016, 09:18 AM #3

It sounds like you're wondering if the noise you hear during heavy use is typical or if it raises concerns. Without a recording, it's hard to say for sure, but let's consider what might be happening.

SurviveMiner
Member

191

11-27-2016, 05:41 AM

The sound was clear, I tried my best to record it in m4a format.

SurviveMiner

11-27-2016, 05:41 AM #4

The sound was clear, I tried my best to record it in m4a format.

MagiicCraft
Member

107

11-28-2016, 10:28 PM

I just included the audio in my update.

MagiicCraft

11-28-2016, 10:28 PM #5

I just included the audio in my update.

ThomGamer045
Member

157

11-29-2016, 06:06 AM

Pay close attention, shifting your position slightly. Is the noise coming from the pump or the fans? Keep your ears near but not too close.

ThomGamer045

11-29-2016, 06:06 AM #6

Pay close attention, shifting your position slightly. Is the noise coming from the pump or the fans? Keep your ears near but not too close.

xFiction_
Junior Member

11-29-2016, 06:14 AM

Check if any cable is too near certain fan blades. Otherwise, the sound is likely just from pump vibrations caused by manufacturing tolerances. A loose pump mount can cause overheating before temperature issues appear because of reduced airflow.

xFiction_

11-29-2016, 06:14 AM #7

Nelina
Member

184

11-29-2016, 07:42 AM

It occurs mainly when I raise the pump speed to 90%, which suggests it’s probably that

Nelina

11-29-2016, 07:42 AM #8

It occurs mainly when I raise the pump speed to 90%, which suggests it’s probably that

Retrebution
Junior Member

12-21-2016, 02:37 AM

It's approximately 5 years old and it's a Model X.

Retrebution

12-21-2016, 02:37 AM #9

It's approximately 5 years old and it's a Model X.

LuisinDosCraft
Member

165

12-22-2016, 02:51 AM

#10

The PC was assembled about a year ago, and the cooling solution mentioned is the FROSTFLOW X 120. It appears this model was developed by PC Specialist, not by me.

LuisinDosCraft

12-22-2016, 02:51 AM #10

The PC was assembled about a year ago, and the cooling solution mentioned is the FROSTFLOW X 120. It appears this model was developed by PC Specialist, not by me.

Pages (2): 1 2 Next