F5F Stay Refreshed Hardware Desktop After powering down, the system automatically hides the screen when idle (power plan).

After powering down, the system automatically hides the screen when idle (power plan).

After powering down, the system automatically hides the screen when idle (power plan).

A
Atomic_Flame
Junior Member
22
05-14-2021, 01:48 PM
#1
Hello. As the title says, I get no display after turning off monitor. Meaning no signal. After restart, everything is normal (I think). Most of the time I get hardware error 1b0. Today, I get 1a8. The past, i.e. 1-2 weeks ago, I got 117,193... From the power plan, you can edit it, like how many minutes until display turn off and how many minutes idle until auto-sleep. When the display turns off, no display after moving my mouse. This happens after I bought a sapphire nitro+ rx 6600 xt and switch my gpu. I don't get much trouble with my previous (I think. Sometimes black screen) I search online (though I can't find much. Maybe I'm searching incorrectly) and some say ram, amd software, amd itself, psu, or the gpu itself. Or the pcie gen problem. I don't really want to consider replacing any components or rma the gpu. I have two dual channel ram (2 of 2x8GB) installed. I removed one and I'm not sure if it helped. On a side note, sometimes if I AFK in PSO2 NGS when I alt tab back to the game, it crashed and says I need to restart. Also, when my computer auto sleep, I sometimes get no signal or a message from amd software saying that it recover a display driver and need a restart or recovered from potential crash/hang. (I attached one example) **I could actually shutdown my computer when the this happens with alt-tab and pull up menu with alt-tab. I could do the windows key +ctrl+shift+b for graphics driver refresh or something with the beep, but doesn't help. I did hardware diagnostic, sfc /scannow, cmd disk check, reseated ram and gpu. I didn't try my old gpu, but it also has some problems (I forgot) ** I didn't do any overclocking or enable anything about overclocking, except for xmp, that I'm aware of. ***I can manually put my computer to sleep and wake it up with no problems 99% of the time. That 1% is what I'm waiting for.... -Some might say to send in dump files. I can't find the files for the minidump, except for the big one. I don't really know how to check it. I did it setup where it would automatically create a minidump and not delete it... -In event viewer, I see many warnings about no permissions or something (Idk if this is important) My specs are: -CPU: Ryzen 5 5600X -Motherboard: Asrock B450m Pro4 (no letters/numbers after pro4) -GPU: Sapphire Nitro+ rx6600xt -Memory: Team T-Force Vulcan Z 16GB (2 x 8GB) DDR4 3200 + Corsair Vengeance LPX 16GB (2 x 8GB) DDR4 3200 -Storage: (HDD) WD Blue 1TB-7200 rpm sata + (NVMe M.2): Western Digital WD blue SN550 500GB -PSU: Corsair CV550 -Monitor: xg2405 with displayport 1.4 used (i switch from the included HDMI cable) ++hopefully I did this correctly...
A
Atomic_Flame
05-14-2021, 01:48 PM #1

Hello. As the title says, I get no display after turning off monitor. Meaning no signal. After restart, everything is normal (I think). Most of the time I get hardware error 1b0. Today, I get 1a8. The past, i.e. 1-2 weeks ago, I got 117,193... From the power plan, you can edit it, like how many minutes until display turn off and how many minutes idle until auto-sleep. When the display turns off, no display after moving my mouse. This happens after I bought a sapphire nitro+ rx 6600 xt and switch my gpu. I don't get much trouble with my previous (I think. Sometimes black screen) I search online (though I can't find much. Maybe I'm searching incorrectly) and some say ram, amd software, amd itself, psu, or the gpu itself. Or the pcie gen problem. I don't really want to consider replacing any components or rma the gpu. I have two dual channel ram (2 of 2x8GB) installed. I removed one and I'm not sure if it helped. On a side note, sometimes if I AFK in PSO2 NGS when I alt tab back to the game, it crashed and says I need to restart. Also, when my computer auto sleep, I sometimes get no signal or a message from amd software saying that it recover a display driver and need a restart or recovered from potential crash/hang. (I attached one example) **I could actually shutdown my computer when the this happens with alt-tab and pull up menu with alt-tab. I could do the windows key +ctrl+shift+b for graphics driver refresh or something with the beep, but doesn't help. I did hardware diagnostic, sfc /scannow, cmd disk check, reseated ram and gpu. I didn't try my old gpu, but it also has some problems (I forgot) ** I didn't do any overclocking or enable anything about overclocking, except for xmp, that I'm aware of. ***I can manually put my computer to sleep and wake it up with no problems 99% of the time. That 1% is what I'm waiting for.... -Some might say to send in dump files. I can't find the files for the minidump, except for the big one. I don't really know how to check it. I did it setup where it would automatically create a minidump and not delete it... -In event viewer, I see many warnings about no permissions or something (Idk if this is important) My specs are: -CPU: Ryzen 5 5600X -Motherboard: Asrock B450m Pro4 (no letters/numbers after pro4) -GPU: Sapphire Nitro+ rx6600xt -Memory: Team T-Force Vulcan Z 16GB (2 x 8GB) DDR4 3200 + Corsair Vengeance LPX 16GB (2 x 8GB) DDR4 3200 -Storage: (HDD) WD Blue 1TB-7200 rpm sata + (NVMe M.2): Western Digital WD blue SN550 500GB -PSU: Corsair CV550 -Monitor: xg2405 with displayport 1.4 used (i switch from the included HDMI cable) ++hopefully I did this correctly...