F5F Stay Refreshed Hardware Desktop After installing new RAM, AMBER LED works properly.

After installing new RAM, AMBER LED works properly.

After installing new RAM, AMBER LED works properly.

Pages (2): Previous 1 2
M
MiguelZipfel
Junior Member
Find
40
08-18-2017, 01:37 PM
#11
Try it with me, buddy! Keep in mind that when you insert the sticks and power on, the BIOS will display the memory speed as 2133MHz. To reach the advertised 3200MHz, make sure to turn on XMP or DOCP via the AI Tweaker settings. Avoid doing this unless you're confident the system is working correctly—make sure all memory types appear and you've verified it with a game or stress test.
Reply
Reply
M
MiguelZipfel
08-18-2017, 01:37 PM #11

Try it with me, buddy! Keep in mind that when you insert the sticks and power on, the BIOS will display the memory speed as 2133MHz. To reach the advertised 3200MHz, make sure to turn on XMP or DOCP via the AI Tweaker settings. Avoid doing this unless you're confident the system is working correctly—make sure all memory types appear and you've verified it with a game or stress test.

Reply
Reply
E
ExPrince1
Junior Member
Find
4
08-19-2017, 03:33 AM
#12
I believe I’m on the right track. Inserting the new sticks produced one steady beep and then two brief beeps—likely indicating that VGA wasn’t found.
Reply
Reply
E
ExPrince1
08-19-2017, 03:33 AM #12

I believe I’m on the right track. Inserting the new sticks produced one steady beep and then two brief beeps—likely indicating that VGA wasn’t found.

Reply
Reply
R
rebelka79
Member
Find
185
08-22-2017, 01:55 PM
#13
Are your graphics card connected correctly? You might need to take it out and reinsert it, as a bump during use could have affected its performance.
Reply
Reply
R
rebelka79
08-22-2017, 01:55 PM #13

Are your graphics card connected correctly? You might need to take it out and reinsert it, as a bump during use could have affected its performance.

Reply
Reply
S
SCOPER21
Junior Member
Find
18
08-22-2017, 04:26 PM
#14
Ugh, that's not what I intended. I hope I didn't accidentally affect the GPU.
Reply
Reply
S
SCOPER21
08-22-2017, 04:26 PM #14

Ugh, that's not what I intended. I hope I didn't accidentally affect the GPU.

Reply
Reply
B
BloomingIris
Member
Find
177
08-22-2017, 08:29 PM
#15
I noticed a pattern in the signals—just one long beep followed by two short ones. No memory was recorded.
Reply
Reply
B
BloomingIris
08-22-2017, 08:29 PM #15

I noticed a pattern in the signals—just one long beep followed by two short ones. No memory was recorded.

Reply
Reply
P
Prime3656
Member
Find
158
08-29-2017, 04:41 AM
#16
Use a single stick in the initial position
Reply
Reply
P
Prime3656
08-29-2017, 04:41 AM #16

Use a single stick in the initial position

Reply
Reply
I
i0cean
Member
Find
218
08-30-2017, 09:10 PM
#17
The only other advice I can give is to check if the live chat support for ASUS is active. You might be able to contact someone at ASUS directly about your problem. They will probably need the board serial, RAM model, and details of your troubleshooting steps.
Reply
Reply
I
i0cean
08-30-2017, 09:10 PM #17

The only other advice I can give is to check if the live chat support for ASUS is active. You might be able to contact someone at ASUS directly about your problem. They will probably need the board serial, RAM model, and details of your troubleshooting steps.

Reply
Reply
Pages (2): Previous 1 2