F5F Stay Refreshed Hardware Desktop After adding the GPU, I didn't start up properly.

After adding the GPU, I didn't start up properly.

After adding the GPU, I didn't start up properly.

Pages (2): 1 2 Next
B
Blacky_Prod
Junior Member
49
12-20-2022, 02:11 PM
#1
Pc specs details: CPU I7 7700, Motherboard Gigabyte Ga-h110m-s2h, RAM Ddr4 16gb, GPU GTX 1050ti, PSU KOLINK 700w. Build is not brand new; RAM and PSU purchased from another source. Old GPU was stored for over a year. Power supply is brand new. Drives excluded since PC won't boot otherwise. Fans spin when CPU gets warm, not hot. No USB devices function. Tested on another PC previously – worked fine. Same with this setup. When I added the last component, GPU failed. Removed GPU, changed RAM, unplugged cables, PSU, and even tried CPU swap to I5 6500. Plugged back drives and battery for 5 minutes. Still no improvement. Someone has a solution?
B
Blacky_Prod
12-20-2022, 02:11 PM #1

Pc specs details: CPU I7 7700, Motherboard Gigabyte Ga-h110m-s2h, RAM Ddr4 16gb, GPU GTX 1050ti, PSU KOLINK 700w. Build is not brand new; RAM and PSU purchased from another source. Old GPU was stored for over a year. Power supply is brand new. Drives excluded since PC won't boot otherwise. Fans spin when CPU gets warm, not hot. No USB devices function. Tested on another PC previously – worked fine. Same with this setup. When I added the last component, GPU failed. Removed GPU, changed RAM, unplugged cables, PSU, and even tried CPU swap to I5 6500. Plugged back drives and battery for 5 minutes. Still no improvement. Someone has a solution?

R
Relo_273
Member
169
12-20-2022, 02:11 PM
#2
Check the power supply unit and ensure the graphics card is taken out during testing.
R
Relo_273
12-20-2022, 02:11 PM #2

Check the power supply unit and ensure the graphics card is taken out during testing.

D
DragonChaser35
Member
133
12-20-2022, 02:11 PM
#3
I once fixed it myself but didn’t see any improvement; all tests I ran for the GPU were cleared.
D
DragonChaser35
12-20-2022, 02:11 PM #3

I once fixed it myself but didn’t see any improvement; all tests I ran for the GPU were cleared.

T
TdmFan92
Senior Member
602
12-20-2022, 02:11 PM
#4
The board doesn't have a debug LED. It looks like the CPU or board itself might be faulty, but they seem to be functioning properly.
T
TdmFan92
12-20-2022, 02:11 PM #4

The board doesn't have a debug LED. It looks like the CPU or board itself might be faulty, but they seem to be functioning properly.

T
THioRy_IMBA
Junior Member
29
12-20-2022, 02:11 PM
#5
Everything functioned perfectly—no odor, no warping. The debug LED never activated, and I didn’t notice anything unusual even during operation.
T
THioRy_IMBA
12-20-2022, 02:11 PM #5

Everything functioned perfectly—no odor, no warping. The debug LED never activated, and I didn’t notice anything unusual even during operation.

G
GodRaidYT
Member
76
12-20-2022, 02:11 PM
#6
Yes, your previous GPU functions properly on this setup too.
G
GodRaidYT
12-20-2022, 02:11 PM #6

Yes, your previous GPU functions properly on this setup too.

S
Samthebeast888
Junior Member
8
12-20-2022, 02:11 PM
#7
So the PC works on iGPU but not with your GPU ? You didnt' have one in before ? Are you sure it works ?
S
Samthebeast888
12-20-2022, 02:11 PM #7

So the PC works on iGPU but not with your GPU ? You didnt' have one in before ? Are you sure it works ?

E
Edo19
Member
165
12-20-2022, 02:11 PM
#8
In another system within this setup, adding the GPU for the first time didn't result in any changes afterward.
E
Edo19
12-20-2022, 02:11 PM #8

In another system within this setup, adding the GPU for the first time didn't result in any changes afterward.

A
Anxionos
Junior Member
4
12-20-2022, 02:11 PM
#9
I tried it but after adding my 1050ti it was confirmed to work on another PC. On this one, everything failed—fans spun nonstop and the system didn’t power on at all, even after testing various methods.
A
Anxionos
12-20-2022, 02:11 PM #9

I tried it but after adding my 1050ti it was confirmed to work on another PC. On this one, everything failed—fans spun nonstop and the system didn’t power on at all, even after testing various methods.

S
Squampy
Junior Member
48
12-20-2022, 02:11 PM
#10
All system parts match the requirements perfectly and should integrate smoothly. With the GPU in place, here are my thoughts: 1. The graphics card isn’t receiving sufficient power, even though the PSU is capable, it’s missing the required voltage. 2. Are all components functioning properly or can you access the BIOS? 3. A potential solution is a jumper reset to test the system (you already mentioned clearing the CMOS). If none of these work, I’m stuck and sorry for not being able to help further.
S
Squampy
12-20-2022, 02:11 PM #10

All system parts match the requirements perfectly and should integrate smoothly. With the GPU in place, here are my thoughts: 1. The graphics card isn’t receiving sufficient power, even though the PSU is capable, it’s missing the required voltage. 2. Are all components functioning properly or can you access the BIOS? 3. A potential solution is a jumper reset to test the system (you already mentioned clearing the CMOS). If none of these work, I’m stuck and sorry for not being able to help further.

Pages (2): 1 2 Next