F5F Stay Refreshed Hardware Desktop Advanced CPU Tuning Techniques

Advanced CPU Tuning Techniques

Advanced CPU Tuning Techniques

V
V1nD1esel
Junior Member
12
01-18-2022, 03:26 AM
#1
I’ve reviewed some tutorials before, but I’m aiming for the best results. I aim to boost my PC’s performance further. I own these parts: i5-13600k ASUS ROG STRIX Z790-H Gaming CORSAIR VENGEANCE DDR5 RAM 32GB (2x16GB) 5600MHz, EVGA GeForce RTX 3080ti, and the Corsair RM1000x power supply. My CPU cooler is the Corsair H100i Elite Capellix.
V
V1nD1esel
01-18-2022, 03:26 AM #1

I’ve reviewed some tutorials before, but I’m aiming for the best results. I aim to boost my PC’s performance further. I own these parts: i5-13600k ASUS ROG STRIX Z790-H Gaming CORSAIR VENGEANCE DDR5 RAM 32GB (2x16GB) 5600MHz, EVGA GeForce RTX 3080ti, and the Corsair RM1000x power supply. My CPU cooler is the Corsair H100i Elite Capellix.

M
MR_Snorlax231
Member
64
01-25-2022, 01:38 AM
#2
M
MR_Snorlax231
01-25-2022, 01:38 AM #2

J
james26665
Senior Member
537
02-09-2022, 05:32 AM
#3
Sure, aim for a bit better performance overall. I wasn't sure if I'd have to overclock more to match the CPU and GPU.
J
james26665
02-09-2022, 05:32 AM #3

Sure, aim for a bit better performance overall. I wasn't sure if I'd have to overclock more to match the CPU and GPU.

D
Derp7575
Member
184
02-09-2022, 11:08 AM
#4
Proper guides can provide much clearer explanations than what I can write here. You don’t have to push your system to its maximum stability—results will slow down as you go higher. This guide works for your GPU using MSI Afterburner (no need for an MSI card). There’s a dedicated section for Nvidia GPUs, and he actually uses a 3080 Ti in this video to show the point.
D
Derp7575
02-09-2022, 11:08 AM #4

Proper guides can provide much clearer explanations than what I can write here. You don’t have to push your system to its maximum stability—results will slow down as you go higher. This guide works for your GPU using MSI Afterburner (no need for an MSI card). There’s a dedicated section for Nvidia GPUs, and he actually uses a 3080 Ti in this video to show the point.

1
101PINGO
Member
154
02-09-2022, 01:08 PM
#5
There’s a balancing setup you should consider—heat, speed, and voltage. I’d begin at 1.25v with stock clocks and check stability, aiming for temperatures that match the OC CPU specs. For testing, run OCCPU only and monitor temperatures and Linpack 2021. If you hit around 75°C, adjust clock speeds to 5.2 and 4.2 on the P and E cores and observe performance over time.
1
101PINGO
02-09-2022, 01:08 PM #5

There’s a balancing setup you should consider—heat, speed, and voltage. I’d begin at 1.25v with stock clocks and check stability, aiming for temperatures that match the OC CPU specs. For testing, run OCCPU only and monitor temperatures and Linpack 2021. If you hit around 75°C, adjust clock speeds to 5.2 and 4.2 on the P and E cores and observe performance over time.