Adjusting your BIOS settings for faster memory performance
Adjusting your BIOS settings for faster memory performance
yeah I actually have a link for it https://www.amazon.com/OLOy-288-Pin-Desk...VLB59?th=1
You might want to try swapping the stick into a different slot and observe any changes. Consider slightly increasing the memory voltage to around 1.38—this is generally safe. It’s possible the stick is of lower quality and needs a bit more voltage. If needed, take a photo of your BIOS settings to check for unusual behavior on the motherboard. For further guidance, feel free to share more details. Updating your BIOS is also recommended if you haven’t already done so.
You're asking about potential issues with timing settings on a motherboard. If the board altered these settings, it could affect performance or cause hardware problems.
In general, various settings are applied, and the motherboard attempts to establish a default that should function properly, though it may not be fully accurate. Depending on your BIOS version, it might not know what to adjust, such as too low TFRC or low tertiary settings.
Version 3604 might be the issue, but sometimes the newer options could also be the problem. If the previous steps don’t work, consider reverting to an earlier version such as 1 or 2 instead.
Yeah, I also did it in 2006. I didn’t realize I’d tried it before today.