Adjusting the port speed?
Adjusting the port speed?
Hello, I just upgraded my internet speed to 200mbps down and up. To keep cable clutter low, I opted for a powerline adapter to connect my PC. I’m getting about 80mbps up/down, but during a test between the adapters, I measured around 200mbps. I checked the router settings and noticed the port speed is set at 100mbps. Can I change that? How would you go about adjusting it? The router model I’m using is the Technicolor TG799vacXTREAM. Any guidance would be greatly appreciated!
Ethernet supports speeds like 10Mbps, 100Mbps, and 1000Mbps (though higher ones are rare). You can't simply boost a port to 200Mbps; you’ll need a powerline adapter with 1000Mbps ports. Your current kit only has a 1*10/100Mbps port, so you’ll have to purchase a new one.
The names “AV500” and “500Mbps” come from relevant standards and denote the upper theoretical data rate achievable on the physical layer. These labels are applied here only to show compatibility with other AV500 or 500Mbps PowerLine devices. Real performance differs and is constrained by the Ethernet port’s capabilities and network factors like traffic, interference, and wiring quality. If you’re unsure about your setup, it’s wise to seek advice from an IT expert for optimal selection. Available ports: 1 x 10/100Mbps Ethernet; Supported protocols: HomePlug AV IEEE802.3 IEEE802.3u; Operating systems: Windows 10/8.1/8/7/Vista/XP/2000, Mac, Linux. That’s the description listed on Amazon. When discussing power line adapters, I’ve observed they often provide speed estimates, but actual Ethernet performance can vary. Be cautious and verify port speeds. Similar concerns apply to routers—many still offer 100 Mbps ports, while some lack the bandwidth for true Gigabit Internet connections. Conducting thorough research is therefore beneficial. Also, keep in mind that power line adapters are comparable to Wi-Fi; they frequently fall short of expectations.
That is a combination of dishonest marketing and someone who didn't know what he was talking about. As stated, marketers will take the 100 up and 100 down and say it equals 200. Then you have a clueless sales person reading the number 200 on the box and saying it will work. Not exactly a scam, just ignorance of the sales person's part. Return it if you can. 100 is totally unacceptable in 2019. Honestly, I would use WiFi over powerline these days. Powerline was nice when it first came out because it outperformed WiFI, but it hasn't kept up at all. A good 802.11ac router will run circles around powerline.