Adjusting the DVAM frequency
Adjusting the DVAM frequency
It seems the device rebooted by itself, and I adjusted the frequency settings to auto. It still powers off, so it’s not likely the RAM sticks are the issue—they were brand new and arrived today. Possibly the power supply isn’t up to the task, given it’s a 500-watt standard bronze unit.
Even brand new RAM might not be perfect, so you could be unlucky. I suggested running a Memtest to check. Make sure you turn off XMP and reset everything to its default settings first—XMP isn’t always reliable, it helps most of the time but not every setup. Alternatively, if something in your PC isn’t working with the RAM, what processor are you using? The power consumption of RAM is minimal, so it’s unlikely the power supply is the problem.
Could the problem lie with the model I bought from Crucial Ballistix? That specific unit is a CL16BL2K8G32C16U4B. Perhaps that’s the cause? I left for work and now I’m trying to turn off my XMP settings, just letting everything auto-run to check. Or I’m testing one setting at a time. I still have my old RAM stick, so the worst case is switching to another one—though that model was nearly $100.
The purchased kit appears functional but may not operate optimally at 3200 MHz. If errors persist during auto settings without XMP disabled, the unit is likely defective and should be returned for replacement. Running at 2666 MHz is acceptable, and performance differences in most cases are negligible. It's possible another part of your system cannot handle 3200 MHz, so a different unit might still encounter the same issue. If the kit functions at lower frequencies, it's still a solid choice, though no guarantee another model will perform better at higher speeds.
It appears to be functioning, though it seems limited to 2666 MHz while the actual frequency is around 3200 MHz.
XMP isn't always reliable, particularly in basic configurations where your CPU's memory controller might restrict performance. It alters several parameters simultaneously, not just the clock speed, which can strain other parts beyond just the RAM. It functions like overclocking and pushes components past their limits. While the RAM might support speeds up to 3200 MHz, this depends on the specific CPU. The kit remains effective at 2666 MHz, and if you intend to upgrade other parts later, you can still use it, helping you feel confident about your investment.