Adjust your RAM settings for better performance.

F5F Stay Refreshed Hardware Desktop Adjust your RAM settings for better performance.

idodi65
Member

173

12-10-2024, 05:36 AM

Hi The kit i have is G.Skill Tridentz Neo 32 GB (4x8GB) 3800mhz CL14 (it's Samsung B-Die based kit). I have been working with timings and i tightened them much (XMP profile is 14-16-16-16-36 for primary timings), but maybe someone here will tell me if these are optimas settings, or is there some room to improve? Here are timings and AIDA64 benchmark results

idodi65

12-10-2024, 05:36 AM #1

sironip
Member

191

12-12-2024, 10:06 AM

Depends on voltage and cooling performance. CL-12 works. Target temperature below 40°C.

sironip

12-12-2024, 10:06 AM #2

Depends on voltage and cooling performance. CL-12 works. Target temperature below 40°C.

Gustavgurra03
Posting Freak

815

12-12-2024, 02:42 PM

At 1.53V the RAM temperature stays near 38-39°C. It seems CL12 won’t work—maybe CL13 is needed. The GearDownMode must be turned on for a proper boot.

Gustavgurra03

12-12-2024, 02:42 PM #3

At 1.53V the RAM temperature stays near 38-39°C. It seems CL12 won’t work—maybe CL13 is needed. The GearDownMode must be turned on for a proper boot.

OT5
Junior Member

12-18-2024, 10:34 PM

To avoid the v-droop, disabling "power down mode" in the sub timings menu seems reasonable. Your clocks and timings appear fine. It might just be that the IMC prefers tighter timing overall. 14-16-16 at 3800mhz works well!

OT5

12-18-2024, 10:34 PM #4