F5F Stay Refreshed Hardware Desktop Adjust the voltage settings on your 2600x device.

Adjust the voltage settings on your 2600x device.

Adjust the voltage settings on your 2600x device.

P
peanut1507
Junior Member
Find
17
09-20-2018, 04:39 PM
#1
Adjust the voltage carefully. Set the core voltage to 1.4V for your AMD 2600X at 4.075-4.1GHz. Make sure the CPU is running at 4.075GHz on a Gigabyte AORUS B450M with 2x Crucial Ballistix 16GB (8GB each) DDR4-3200 CL16 RAM. Use Dynamic Vcore (DVID) at +0.234V, Dynamic VCORE SOC (DVID) at +0.030V, and DRAM Voltage (CH A/B) at 1.330V. Your BIOS shows a peak of 1.380V during boot, but the main screen reads 1.46V. It seems the readings differ—check your VCore setting and ensure it matches the stable value you want.
Reply
Reply
P
peanut1507
09-20-2018, 04:39 PM #1

Adjust the voltage carefully. Set the core voltage to 1.4V for your AMD 2600X at 4.075-4.1GHz. Make sure the CPU is running at 4.075GHz on a Gigabyte AORUS B450M with 2x Crucial Ballistix 16GB (8GB each) DDR4-3200 CL16 RAM. Use Dynamic Vcore (DVID) at +0.234V, Dynamic VCORE SOC (DVID) at +0.030V, and DRAM Voltage (CH A/B) at 1.330V. Your BIOS shows a peak of 1.380V during boot, but the main screen reads 1.46V. It seems the readings differ—check your VCore setting and ensure it matches the stable value you want.

Reply
Reply
S
Summer_Cool
Member
Find
175
09-22-2018, 01:09 PM
#2
Use only HWInfo64 readings for your measurements. All other data is disabled for improved precision. Manually adjusted 1.36v to avoid voltage droop. Set CPU core voltage directly without offset. Raise LLC if you notice CPU voltage dropping under load. Adjust SOC manually to 1.08 for XMP optimization. Only increase voltage if stability or overclocking beyond XmP is occurring. Disable Cstates during overclocking unless you want unpredictable voltage swings.
Reply
Reply
S
Summer_Cool
09-22-2018, 01:09 PM #2

Use only HWInfo64 readings for your measurements. All other data is disabled for improved precision. Manually adjusted 1.36v to avoid voltage droop. Set CPU core voltage directly without offset. Raise LLC if you notice CPU voltage dropping under load. Adjust SOC manually to 1.08 for XMP optimization. Only increase voltage if stability or overclocking beyond XmP is occurring. Disable Cstates during overclocking unless you want unpredictable voltage swings.

Reply
Reply