Adjust random throttling to 33% for CPU usage.
Adjust random throttling to 33% for CPU usage.
Your laptop runs an i3-1005G1 and occasionally restricts CPU speed to 0.39 GHz while keeping usage at 33%, which is making it difficult to use. The bottom-right panel shows temperatures within normal ranges, so the issue might come from something else affecting performance.
Review the active power profile by clicking the battery icon. Verify it’s configured for Best Performance. You’re aware you can adjust the minimum and maximum processor states in your Power Plan settings, though I’m currently using Windows 11 and can’t directly assist with those changes. This could help you gather some useful details.
@DeadlyCarrot Press the Run ThrottleStop button and open the Limit Reasons window to discover why your CPU is slowing down. https://www.techpowerup.com/download/tec...ottlestop/ Several problems causing Intel CPUs to settle at minimum speed stem from BD PROCHOT throttling. When BD PROCHOT appears red in Limit Reasons, that’s the cause. Clear the BD PROCHOT section on the ThrottleStop main screen to restore full performance. This issue frequently affects many Intel laptops. A Task Manager capture may show CPU Utilization at 33%. Most assume this reflects usage, but utilization and usage differ. Low utilization signals the CPU is being forced below its rated speed. The utilization numbers simply confirm slow operation, which you already see in the Speed data within Task Manager. Share ThrottleStop screenshots while your CPU throttles for assistance. For peak performance, think about turning off Windows 11 Virtualization Based Security and core isolation memory integrity. https://beebom.com/how-disable-virtualiz...indows-11/
BD PROCHOT seems to be sending incorrect data to the processor, causing performance issues. The problem hasn't occurred again yet, but I'm concerned about whether these changes will remain. Should I disable ProChot every time I use my computer? Is it necessary to keep it running continuously for the updates to take effect? Do I need to maintain it on all systems? Thank you in advance!