Adjust details as needed for your setup.

Monicuemonster
Junior Member

07-07-2023, 02:00 PM

Hello, your PC runs without problems normally. When you modify BIOS settings, the system fails and the debug LED stays on red. Resetting BIOS resolves the issue. Your hardware details are listed above. You’re wondering why changes to BIOS prevent it from booting properly.

Monicuemonster

07-07-2023, 02:00 PM #1

cw1502
Member

07-07-2023, 09:28 PM

Adjusting the configuration now. Reconnecting all CPU power connectors at each end.

cw1502

07-07-2023, 09:28 PM #2

Adjusting the configuration now. Reconnecting all CPU power connectors at each end.

Mirrorous
Member

148

07-08-2023, 02:17 PM

I switched to Enabled, increased RAM from 26666 to 32000 in Xmp Boost mode, and enabled Resize Bar support.

Mirrorous

07-08-2023, 02:17 PM #3

I switched to Enabled, increased RAM from 26666 to 32000 in Xmp Boost mode, and enabled Resize Bar support.

minifig_cd
Member

168

07-08-2023, 03:38 PM

And altering just one part doesn't stop it from refusing to upload. (I also included an additional digit at the end of the RAM speed details.)

minifig_cd

07-08-2023, 03:38 PM #4

And altering just one part doesn't stop it from refusing to upload. (I also included an additional digit at the end of the RAM speed details.)

A_Piggy
Member

211

07-11-2023, 04:48 PM

Agreed. And oops, yes.

A_Piggy

07-11-2023, 04:48 PM #5

Agreed. And oops, yes.

McRay11
Junior Member

07-29-2023, 10:43 PM

It might be a faulty CPU or a bad motherboard. I’d reach out to MSI to check if they’ll process a return.

McRay11

07-29-2023, 10:43 PM #6

It might be a faulty CPU or a bad motherboard. I’d reach out to MSI to check if they’ll process a return.

Commando__
Senior Member

744

07-30-2023, 02:01 AM

This situation doesn't seem logical after resetting the BIOS—it starts from Windows with all hardware detected properly. For example: CPU with 12 cores, GPU with 3 units, 96GB RAM, all 6 drives present, and all displays showing content I'm receiving on the same machine.

Commando__

07-30-2023, 02:01 AM #7

Candy_737
Senior Member

254

07-30-2023, 04:59 AM

Candy_737

07-30-2023, 04:59 AM #8

LorrenK
Senior Member

703

08-02-2023, 09:06 AM

Thank you for your input. I placed an order for a fourth sick of Ram, expecting delivery by October. I’ll revise this entry once I’ve installed it and completed some tests. P.S. Appreciate the encouragement!

LorrenK

08-02-2023, 09:06 AM #9

iNaomiPlays
Senior Member

609

08-09-2023, 05:07 PM

#10

Hey, I understand you mentioned October but we're here now. I replaced the 4th RAM stick, repositioned the plugs, and updated the BIOS, but it didn't help. So I went all in and re-settched the CPU, GPU, and both ends of the power cables. Now I can adjust settings in the BIOS without any issues. Thanks for your guidance!

iNaomiPlays

08-09-2023, 05:07 PM #10